JB/T 10226.2-2011Double column milling and planing machines - Part 2: Technical requirements (English PDF)

1 Foreword

JB/T 10226.2-2011 was issued by MIIT on 18 May 2011 and has been in force since 1 August 2011.

It replaces the earlier edition JB/T 10226.2-2001.

It is one of 3 parts of the JB/T 10226 series.

2 Scope

This standard is a recommended Chinese machinery industry standard, and what it carries are the technical requirements for double column milling and planing machines. It specifies those requirements for the manufacture and the acceptance of the gantry milling and planing machine. The machines named in the application clause of JB/T 10226.2-2011 are ordinary, general purpose and precision gantry milling and planing machines with a maximum planing width from 800 mm to 2000 mm. The edition it replaces is JB/T 10226.2-2001. Chinese classification J57 and international classification 25.080.25 are its codes. Among the standards it quotes are GB 5226.1, GB/T 6576-2002, GB/T 9061-2006, GB 15760, GB/T 23570-2009, JB/T 9872-1999 and JB/T 10226.1-2001.

3 Normative references

JB/T 10226.2-2011 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB 5226.1

GB/T 6576-2002 — Machine tool -- Lubrication systems

GB/T 9061-2006

GB 15760

GB/T 16769-2008 — Metal-cutting machine tools -- Measurement method of sound pressure level

GB/T 23570-2009 — Welding parts for metal cutting machines - General specifications

GB/T 23572-2009 — Hydraulic system general specifications for metel-cutting machine tools

GB/T 23575-2009 — Metal cutting machine tools - Check and evaluation for taper surface by miniating

JB/T 9872-1999 — Metal cutting machine tools - General technical requirements for machined parts

JB/T 9874-1999 — Metal cutting machine tools - General technical requirements for assembly

JB/T 9877-1999 — Metal cutting machine tools - Determination of cleanliness

JB/T 10226.1-2001 — Double column milling machines - Testing of the accuracy

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Related standards

Other parts of this standard:

JB/T 10226.1-2001 — Double column milling machines - Testing of the accuracy

JB/T 10226.1-2015 — Double column milling and planing machines. Part 1: Testing of the accuracy

Other editions:

JB/T 10226.2-2001 (earlier edition)

6 Classification and status

International classification (ICS): 25.080.25

Prefix JB/T: recommended standard.