JB/T 10191-2010Bag filters - Safety requirements - Manifolds for pulse-jet bag filters (English PDF)
袋式除尘器 安全要求脉冲喷吹类袋式除尘器用分气箱
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10191-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 10191-2010 is the English-translated version of 袋式除尘器 安全要求脉冲喷吹类袋式除尘器用分气箱.
Safety is the angle JB/T 10191-2010 takes on bag filters: this recommended Chinese machinery industry standard is given to the manifold, the gas box that feeds the pulse-jet type of bag filter.
It sets the basic parameters of the steel gas tanks used in that duty, both the square section with rounded corners and the circular section, and it lays down safety requirements together with inspection, packaging, transport and storage.
It applies to the manifold box that holds the compressed gas supplied to the intermittent pulse valves used for jet cleaning. It replaces JB/T 10191-2000. Among the standards it quotes are GB 150-1998, GB/T 3274, GB/T 8163, JB/T 4709 and JB/T 4711.
Found what you need?
Document preview — JB/T 10191-2010
National Standard of the People's Republic of China
- ICS
- 13.030.40
- Replacing
- JB/T 10191-2000
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 10191-2010 was issued by MIIT on 11 February 2010 and has been in force since 1 July 2010.
It replaces the earlier edition JB/T 10191-2000.
2 Scope
Safety is the angle JB/T 10191-2010 takes on bag filters: this recommended Chinese machinery industry standard is given to the manifold, the gas box that feeds the pulse-jet type of bag filter. It sets the basic parameters of the steel gas tanks used in that duty, both the square section with rounded corners and the circular section, and it lays down safety requirements together with inspection, packaging, transport and storage. It applies to the manifold box that holds the compressed gas supplied to the intermittent pulse valves used for jet cleaning. It replaces JB/T 10191-2000. Among the standards it quotes are GB 150-1998, GB/T 3274, GB/T 8163, JB/T 4709 and JB/T 4711.
3 Normative references
JB/T 10191-2010 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB 150-1998
GB 713
GB 912
GB/T 3274
GB/T 8163
GB/T 13277.1
JB/T 4709
JB/T 4711
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10191-2000 (earlier edition)
6 Classification and status
International classification (ICS): 13.030.40
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 912[GB/T 912-2008] Hot-rolled sheets and strips of carbon structural steels and high strength low alloy structural steels
- GB/T 3274Hot-rolled plates, sheets and strips of carbon structural steels and high strength low alloy structural steels
- GB/T 8163Seamless steel pipes for liquid service
- GB/T 13277.1Compressed air - Part 1: Contaminants and purity classes
- JB/T 4709Welding specification for steel pressure vessels
- JB/T 4711Coating and transport packaging of pressure vessels
GB 150-1998 · GB 713
Cited by
- DL/T 387-2019Guideline of flue gas bag filter selection for thermal power plants
- HJ 178-2018General technical specification of circulating fluidized bed flue gas desulfurization
- HJ/T 178-2018General technical specification of circulating fluidized bed flue gas desulfurization
- JB/T 12115-2015Dry flue gas desulphurization and multi-pollutants emission coordination control system for sintering flue gas
Similar standards
Editions of JB/T 10191
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10191-2010 | Bag filters - Safety requirements - Manifolds for pulse-jet bag filters | current edition | Current |
| JB/T 10191-2000 | Bag filters - Safety requirements - Manifolds for pulse-jet bag filters | previous edition | Superseded |
This page sells the current edition, JB/T 10191-2010. Earlier editions are listed for reference only.
How to Download JB/T 10191-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 912-2008 — [GB/T 912-2008] Hot-rolled sheets and strips of carbon structural steels and high strength low alloy structural steels
GB/T 13277.1-2023 — Compressed air - Part 1: Contaminants and purity classes
GB/T 3274-2017 — Hot-rolled plates, sheets and strips of carbon structural steels and high strength low alloy structural steels
Secure payment via Stripe
Payments accepted
JB/T 10191-2010
$135.00