Valid

JB/T 10034-2012Grating angular displacement measuring systems (English PDF)

光栅角位移测量系统

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10034-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 24, 2012

Implementation date

November 1, 2012

Scope

JB/T 10034-2012 is the English-translated version of 光栅角位移测量系统.

JB/T 10034-2012 is the recommended Chinese machinery industry standard for grating angular displacement measuring systems.

It fixes the terminology and definitions used for these systems, their basic parameters and characteristics, the requirements they must satisfy, their electrical safety performance, their environmental adaptability, the test methods, the inspection rules and the packaging provisions.

The standard carries the Chinese classification J42 and the international classification 17.040.30. Among the standards it quotes are GB/T 2423.1-2008, GB 4208-2008, GB/T 4857.5-1992, GB 5226.1-2008 and GB/T 17626.2-2006.

JB/T 10034-2012 replaces the earlier edition of the same number, JB/T 10034-1999, and the issuing agency is the Ministry of Industry and Information Technology.

Found what you need?

Document preview — JB/T 10034-2012

National Standard of the People's Republic of China

ICS
17.040.30
Replacing
JB/T 10034-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 10034-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.

It replaces the earlier edition JB/T 10034-1999.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the recommended Chinese machinery industry standard for grating angular displacement measuring systems. It fixes the terminology and definitions used for these systems, their basic parameters and characteristics, the requirements they must satisfy, their electrical safety performance, their environmental adaptability, the test methods, the inspection rules and the packaging provisions. The standard carries the Chinese classification J42 and the international classification 17.040.30. Among the standards it quotes are GB/T 2423.1-2008, GB 4208-2008, GB/T 4857.5-1992, GB 5226.1-2008 and GB/T 17626.2-2006. JB/T 10034-2012 replaces the earlier edition of the same number, JB/T 10034-1999, and the issuing agency is the Ministry of Industry and Information Technology.

JB/T 10034-2012 falls under ICS 17.040.30, in the field of metrology and measurement.

This catalogue holds 163 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191-2008 — Packaging - Pictorial marking for handling of goods

GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold

GB/T 2423.2-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat

GB/T 2423.3-2006 — Environmental testing for electric and electronic products - Part 2: Testing method - Test Cab: Damp heat, steady state

GB/T 2423.10-2008 — Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)

GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)

GB/T 4857.5-1992 — Packaging-Transport packages-Vertical impact test method by dropping

GB/T 4879-1999 — Rustproof packaging

GB/T 5048-1999 — Moistureproof packaging

GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements

GB/T 6388-1986 — Transport package shipping mark

GB/T 9969-2008 — General principles for preparation of instructions for use of industrial products

GB/T 13384-2008 — General specifications for packing of mechanical and electrical product

GB/T 14436-1993 — General Principles of Industrial Product Guarantee Documents

GB/T 17626.2-2006 — Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 10034-1999 (earlier edition)

Standards on related subjects:

GB/T 10932-2024 — Screw thread micrometer

GB/T 1218-2018 — Depth micrometer

GB/T 1957-2006 — Tolerances and general features for plain limit gauges

JB/T 10031-2019 — Gauges for 55° sealing pipe threads

JB/T 10033-2018 — Micrometer head

JB/T 10030-2012 — Grating linear displacement measuring devices

6 Classification and status

International classification (ICS): 17.040.30

Chinese Standard Classification (CCS): J 42

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 10034

EditionTitleRevisionStatus
JB/T 10034-2012Grating angular displacement measuring systemscurrent editionCurrent
JB/T 10034-1999Grating angular displacement measuring systemsprevious editionSuperseded

This page sells the current edition, JB/T 10034-2012. Earlier editions are listed for reference only.

How to Download JB/T 10034-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10034-2012

$145.00