Valid

JB/T 10024-2008Horizontal hob measuring instruments (English PDF)

卧式滚刀测量仪

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10024-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

March 12, 2008

Implementation date

September 1, 2008

Scope

JB/T 10024-2008 is the English-translated version of 卧式滚刀测量仪.

JB/T 10024-2008 is a recommended Chinese machinery industry standard on horizontal hob measuring instruments. It gives the terms and definitions for the hob gauge, its types and basic parameters, the requirements, the testing, the inspection rules and the marking and packaging.

JB/T 10024-2008 applies to electronic horizontal hob measuring instruments that determine the composite error of a hob and a range of individual errors, for hobs up to a maximum measured diameter of 300 mm, and other electronic instruments working on the same principle may apply it by reference.

Among the standards it quotes are GB/T 17163-1997, GB/T 17164-1997 and GB 9969.1-1998. It replaces JB/T 10024-1999.

Found what you need?

Document preview — JB/T 10024-2008

National Standard of the People's Republic of China

ICS
25.060.20; 17.040.30
Replacing
JB/T 10024-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 10024-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 12 March 2008 and has been in force since 1 September 2008.

It replaces the earlier edition JB/T 10024-1999.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard on horizontal hob measuring instruments. It gives the terms and definitions for the hob gauge, its types and basic parameters, the requirements, the testing, the inspection rules and the marking and packaging. JB/T 10024-2008 applies to electronic horizontal hob measuring instruments that determine the composite error of a hob and a range of individual errors, for hobs up to a maximum measured diameter of 300 mm, and other electronic instruments working on the same principle may apply it by reference. Among the standards it quotes are GB/T 17163-1997, GB/T 17164-1997 and GB 9969.1-1998. It replaces JB/T 10024-1999.

JB/T 10024-2008 falls under ICS 25.060.20; 17.040.30, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191-2000 — Packaging-Pictorial marking for handling of goods

GB/T 4879-1999 — Rustproof packaging

GB/T 5048-1999 — Moistureproof packaging

GB/T 6388-1986 — Transport package shipping mark

GB 9969.1-1998 — General principles for preparation of instructions for use of industrial products

GB/T 14436-1993 — General Principles of Industrial Product Guarantee Documents

GB/T 17163-1997 — Glossary of terms used in dimensional measuring instruments--General terms

GB/T 17164-1997 — Glossary of terms used in dimensional measuring instruments--Product terms

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 10024-1999 (earlier edition)

Standards on related subjects:

GB/T 10932-2024 — Screw thread micrometer

GB/T 1218-2018 — Depth micrometer

GB/T 1957-2006 — Tolerances and general features for plain limit gauges

JB/T 10031-2019 — Gauges for 55° sealing pipe threads

JB/T 10033-2018 — Micrometer head

JB/T 10020-2013 — Universal Gear Measuring Machine

6 Classification and status

International classification (ICS): 25.060.20; 17.040.30

Chinese Standard Classification (CCS): J 42

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 10024

EditionTitleRevisionStatus
JB/T 10024-2008Horizontal hob measuring instrumentscurrent editionCurrent
JB/T 10024-1999Horizontal hob measuring instrumentsprevious editionSuperseded

This page sells the current edition, JB/T 10024-2008. Earlier editions are listed for reference only.

How to Download JB/T 10024-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10024-2008

$105.00