JB/T 10022-2013Portable gear circular pitch measuring instruments (English PDF)
便携式齿轮齿距测量仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10022-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 10022-2013 is the English-translated version of 便携式齿轮齿距测量仪.
Portable gear circular pitch measuring instruments are dealt with by JB/T 10022-2013, a recommended Chinese machinery industry standard. The document sets out the terms and definitions for portable gear pitch meters, their types and basic parameters, the requirements they must meet, the test methods, and the marking and packaging provisions.
JB/T 10022-2013 applies to the testing of gears with a module from 2 mm to 16 mm. The classification is J42 in the Chinese scheme and 17.040.30 in the international one.
Among the standards it quotes are GB/T 308.1-2013, GB/T 1219-2008, GB/T 10095.1-2008, GB/T 18761-2007 and JB/T 9329-1999. It replaces JB/T 10022-1999. The Ministry of Industry and Information Technology issued it.
Found what you need?
Document preview — JB/T 10022-2013
National Standard of the People's Republic of China
- ICS
- 17.040.30
- Replacing
- JB/T 10022-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 10022-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 10022-1999.
2 Scope
Portable gear circular pitch measuring instruments are dealt with by JB/T 10022-2013, a recommended Chinese machinery industry standard. The document sets out the terms and definitions for portable gear pitch meters, their types and basic parameters, the requirements they must meet, the test methods, and the marking and packaging provisions. JB/T 10022-2013 applies to the testing of gears with a module from 2 mm to 16 mm. The classification is J42 in the Chinese scheme and 17.040.30 in the international one. Among the standards it quotes are GB/T 308.1-2013, GB/T 1219-2008, GB/T 10095.1-2008, GB/T 18761-2007 and JB/T 9329-1999. It replaces JB/T 10022-1999. The Ministry of Industry and Information Technology issued it.
3 Normative references
JB/T 10022-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 308.1-2013 — Rolling bearings -- Balls -- Part 1: Steel balls
GB/T 1219-2008 — Dial gauges
GB/T 4879-1999
GB/T 5048-1999
GB/T 6388-1986 — Transport package shipping mark
GB/T 9969-2008 — General principles for preparation of instructions for use of industrial products
GB/T 10095.1-2008
GB/T 14436-1993 — General Principles of Industrial Product Guarantee Documents
GB/T 18761-2007 — Dial indicator with electronic digital display
JB/T 9329-1999 — Instruments - Basic environmental conditions and test methods for transportation and storage
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10022-1999 (earlier edition)
6 Classification and status
International classification (ICS): 17.040.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 10022
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10022-2013 | Portable gear circular pitch measuring instruments | current edition | Current |
| JB/T 10022-1999 | Portable gear circular pitch measuring instruments | previous edition | Superseded |
This page sells the current edition, JB/T 10022-2013. Earlier editions are listed for reference only.
How to Download JB/T 10022-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1219-2008 — Dial gauges
GB/T 14436-1993 — General Principles of Industrial Product Guarantee Documents
GB/T 18761-2007 — Dial indicator with electronic digital display
Secure payment via Stripe
Payments accepted
JB/T 10022-2013
$169.00