HJ 2513-2012Technical requirement for environmental labeling products. Video cameras (English PDF)
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for HJ 2513-2012 in 30 minutes.
Issued by
Ministry of Ecology and Environment
Level / Type
National · Mandatory
Issue date
January 1, 1970
Implementation date
January 1, 1970
Scope
HJ 2513-2012 (Technical requirement for environmental labeling products. Video cameras) is available as an English-translated PDF.
HJ 2513-2012 — This standard specifies the terms and definitions, basic requirements, technical content and testing methods of the camera environmental labeling products.
This standard applies to camera products, including storage tape, semiconductor memory or semiconductor memory chips, optical discs and hard Disk, etc., not suitable for broadcast-quality camera products.
Found what you need?
Document preview — HJ 2513-2012
National Standard of the People's Republic of China
- ICS
- 33.160.40
- Classification
- M 71
Issued by: Ministry of Ecology and Environment
Contents
- Foreword
- 1 Scope of application
- 2 Normative references
- 3 Terms and definitions
- 4 Basic requirements
- 5 Technical content
- 5.1 Product Environmental Protection Design Requirements
- 5.2 Product production stage requirements
- 5.3 Product requirements
- 06 Test methods
Foreword
To implement the Environmental Protection Law of the People's Republic of China, reduce the environmental and human health of camera products during production and use.
Influence, develop this standard.
This standard is designed for camera product components such as optical lenses, batteries, chargers, plastic parts, metal parts and products.
The requirements contained in the production process and public information are required.
This standard is the first release.
This standard applies to China Environmental Labeling Product Certification.
This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.
This standard is mainly drafted by. China-Japan Friendship Environmental Protection Center, Canon (China) Co., Ltd., Tianjin Samsung Optoelectronics Co., Ltd.
Company, Matsushita Electric (China) Co., Ltd., Sony (China) Co., Ltd.
This standard was approved by the Ministry of Environmental Protection on March 30, 2012.
This standard has been implemented since June 1, 2012.
This standard is explained by the Ministry of Environmental Protection.
HJ -----201-
Environmental Labeling Product Technical Requirements Camera
1 Scope of application
This standard specifies the terms and definitions, basic requirements, technical content and testing methods of the camera environmental labeling products.
This standard applies to camera products, including storage tape, semiconductor memory or semiconductor memory chips, optical discs and hard Disk, etc., not suitable for broadcast-quality camera products.
2 Normative references
The contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard.
GB 20943 Single output AC-DC and AC-AC external power supply energy efficiency limit value and energy saving evaluation value GB/T 16288 logo for plastic products GB/T 18455 packaging recycling mark GB/T 26572 Limit requirements for restricted substances in electrical and electronic products SJ/T 11415 General Specification for Non-broadcast Digital Camcorders
3 Terms and definitions
The following terms and definitions apply to this standard.
Camera video camera
Through the image and sound sensors, the light and sound signals are converted into electrical signals, and the images are processed through a series of processes and electronic devices whose sound is recorded on a storage medium (such as a magnetic tape, a magnetic disk or a memory card, a compact disk, a hard disk, etc.).
4 Basic requirements
4.1 Product quality should meet the requirements of SJ/T 11415 or other corresponding standards.
4.2 Pollutant emissions from product manufacturing enterprises shall comply with the requirements of national or local pollutant discharge standards.
4.3 Product manufacturers should strengthen clean production in the production process.
5 Technical content
5.1 Product Environmental Protection Design Requirements
5.1.1 Easy to disassemble design
The product is detachable.
5.1.2 Easy to recycle design
5.1.2.1. Plastic parts with a mass exceeding 25 g or a planar surface area exceeding.200 mm2 shall use a single type of polymer or copolymerization Object.
5.1.2.2. The type of polymer, copolymer or polymerization mixture used in the product shall not exceed 4 and is easily decomposed.
5.1.2.3. Plastic parts with a mass exceeding 25g and a surface area exceeding.200mm2 shall be marked in accordance with the requirements of GB/T 16288.
5.1.3 Requirements for hazardous substances in parts and components
HJ -----201-
5.1.3.1. The product shell shall not use chlorine-containing or bromine-containing polymers, and shall not be added with organic chlorine compounds or organic bromine compounds.
Burning agent.
5.1.3.2. The product enclosure shall not use the phthalate esters listed in Appendix A as plasticizers.
5.1.3.3. Plastic components shall not be added with short-chained chlorinated paraffins (SCCPs) or deca-BDE (Deca-BDE), of which short-chain chlorinated paraffins (SCCPs) content shall not exceed 0.1% of the total plastic parts.
5.1.3.4. Product shell, the content of benzo(a)pyrene in the hand-held belt shall not exceed 1 mg/kg, and the 16 items of multi-rings listed in Appendix B the sum of aromatic compounds (PAHs) must not exceed 10 mg/kg.
5.1.3.5. Optical lenses used in conjunction with the product shall not use lead (Pb) and its compounds as ingredients.
5.2 Product production stage requirements
5.2.1 Methylene chloride (CH2Cl2) should not be used as a cleaning solvent in the production of optical lenses.
5.2.2 The assembly of parts shall not use hydrochlorofluorocarbons (HCFCs), 1,1,1-trichloroethane (C2H3Cl3), trichloroethylene.
(C2HCl3), dichloroethane (CH3CHCl2), dichloromethane (CH2Cl2), chloroform (CHCl3), carbon tetrachloride (CCl4), A substance such as bromopropane (C3H7Br) is used as a cleaning solvent.
5.2.3 Lead-free soldering process should be used during component assembly and connection.
5.3 Product requirements
5.3.1 Requirements for hazardous substances in products
Lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr6), polybrominated biphenyls (PBBs), polybrominated diphenyl ethers (PBDEs) in products the content should meet the requirements of GB/T 26572.
5.3.2 Product supporting battery and adapter requirements
5.3.2.1. The heavy metals in the battery of the product shall meet the requirements of Table 1.
Table 1 Limits of heavy metals in batteries. mg/kg
Heavy metal
Project Lead (Pb) Cadmium (Cd) Mercury (Hg) Battery <= 40 <= 20 <= 5 5.3.2.2. After the product power battery has been charged and discharged 300 times, its remaining capacity should still be greater than 80% of its rated capacity.
5.3.2.3. For products equipped with adapters, the average efficiency rating of the adapter's energy efficiency should meet the requirements of Table 2.
Table 2 Average efficiency energy efficiency limit
Output power nominal value (P0)/W minimum average efficiency Output voltage is greater than or equal to 6V, output voltage is less than 6V
06 Test methods
6.1 Technical content The inspection of 5.3.2.3 and 5.3.2.4 shall be carried out in accordance with the method specified in GB 20943.
6.2 Other requirements in the technical content are verified by document review in conjunction with on-site verification.
HJ -----201-
Appendix A
(normative appendix) Phthalate banned in the outer casing of the product Chinese name English name abbreviation Diisoisophthalate Di-iso-nonylphthalate DINP Di-n-octylphthalate DNOP Di-(2-ethylhexy)-phthalate DEHP Diisoisylphthalate DIDP Butylbenzylphthalate BBP Dibutylphthalate DBP HJ -----201-Appendix B (normative appendix) Restricted use of polycyclic aromatic compounds (PAHs) Chinese name English name abbreviation Naphthalene Napene Nap Terenaphthylene AcPy 苊Acenaphthene Acp 芴Fluorene Flu Philippine Phenanthrene PA 蒽Anthracene Ant Fluoranthine Fluoranthene FL 芘Pyrene Pyr 1,2-benzophenanthrene Chrysene CHR Benzo(a)蒽Benzo[a]anthracen BaA Benzo(b)fluoranthene Benzo[b]fluoranthene BbF Benzo(k)fluoranthene Benzo[k]fluoranthene BkF Benzo(a)芘Benzo[a]pyrene BaP Dibenzo[a, h)蒽Dibenzo[a,h]anthrancene DBA 茚(1,2,3-cd)芘Indeno[1,2,3-cd]pyrene IND Benzo(g,h,i) (perylene) Benzo[g,h,i]perylene BghiP
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 20943Minimum allowable values of energy efficiency and energy efficiency grades for AC-DC and AC-AC power supplies
- GB/T 16288Marking of plastics products
- GB/T 18455Packaging recycling marking
- GB/T 26572Requirements of concentration limits for certain restricted substances in electrical and electronic products
How to Download HJ 2513-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 20943-2013 — Minimum allowable values of energy efficiency and evaluating values of energy conservation for single voltage external AC-DC and AC-AC power supplies
GB 20943-2025 — Minimum allowable values of energy efficiency and energy efficiency grades for AC-DC and AC-AC power supplies
GB/T 16288-2024 — Marking of plastics products
Secure payment via Stripe
Payments accepted
HJ 2513-2012
$244.00