HJ 2512-2012Technical requirement for environmental labeling products. Printers, Fax machines, Multifunction devices (English PDF)

Foreword

To reduce the production and use of printers, fax machines and all-in-one products in order to implement the Environmental Protection Law of the People's Republic of China this standard is formulated to affect the environment and human health during the process and to protect the environment.

This standard applies to energy consumption, noise, toxic and hazardous substances, environmental design, and raw materials for printers, fax machines, and all-in-ones.

Requirements for production processes, recycling and reuse, and specifications.

This standard refers to the German Environmental Labeling Foundation (Basic Criteria for Award of the Environmental) Label Office Equipment with Printing (Printer, Copier, Multifunction) (Office Equipment with Printing) Function (Printers, Copiers, Multifunction Devices)) (RAL-UZ 122, 2009), and the Japan Environmental Association Environmental Labeling Agency "Eco-label type NO.122" "Printer Version2.2.2010" for "Environmental Label Product Certification Technology" the printer, fax machine and all-in-one machine (HJ/T 302-2006) was revised.

The main changes in this standard compared to HJ/T 302-2006 are as follows.

-- Added definitions for printers, fax machines, etc.;

-- Revised the requirements for environmental design;

-- Revised the requirements for pollutant discharge;

-- Revised the requirements for the use of toxic and hazardous substances;

-- Revised the regulations for product energy consumption;

-- Increased requirements for carbon dioxide emissions from products;

-- Increased requirements for adapter energy consumption;

-- Increased the requirements for double-sided printing devices;

-- Increased requirements for consumables

-- Revised the requirements for noise during the use of the product;

-- Revised the standard appendix.

This standard applies to China Environmental Labeling Product Certification and China Environmental Labeling Low Carbon Product Certification.

This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.

This standard is mainly drafted by. China-Japan Friendship Environmental Protection Center, National Office Equipment and Consumables Quality Supervision and Inspection Center.

This standard was approved by the Ministry of Environmental Protection on March 30, 2012.

This standard has been implemented since June 1, 2012.

This standard is explained by the Ministry of Environmental Protection.

The previous versions of the standards replaced by this standard are.

--HBC 36-2005, HJ/T 302-2006.

HJ -----201-

Environmental labeling products technical requirements printers, fax machines and all-in-ones

1 Scope of application

This standard specifies the terms and definitions, basic requirements, and technical requirements of printers, fax machines, and all-in-one environmental labeling products.

Capacity and test methods.

This standard applies to the normal operation of 220V, 50Hz power supply, standard format printers, fax machines and to print or pass A versatile machine that is essential for basic functions, including the use of stylus, inkjet, electrostatic imaging, thermal transfer, thermal, sublimation, solid A product such as a body spray wax.

2 Normative references

The contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard.

GB 20943 Single output AC-DC and AC-AC external power supply energy efficiency limit value and energy saving evaluation value GB 25956-2010 Energy efficiency limit value and energy efficiency rating of printers and fax machines GB/T 16288 logo for plastic products GB/T 16685-2008 Information technology - Measuring methods for the throughput of printing equipment - 1 GB/T 18313-2001 Measurement of airborne noise of acoustic information technology equipment and communication equipment GB/T 18455 packaging recycling mark GB/T 22372 monochrome black and white laser printer test version HJ/T 238 Environmental Labeling Product Technical Requirements Rechargeable Battery HJ 570-2010 Environmental Labeling Product Technical Requirements Toner Cartridge HJ 573-2010 Environmental Labeling Products Technical Requirements QB/T 2342 copy paper ISO/IEC 28360:2007 Determination of chemical emission rates in electronic equipment for office equipment

3 Terms and definitions

GB 25956-2010 and the following terms and definitions apply to this standard.

4 Basic requirements

4.1 Product quality, safety performance, electromagnetic compatibility and pollutant control shall comply with the requirements of the corresponding standards.

4.2 Pollutant emissions from product manufacturing enterprises shall comply with the requirements of national or local pollutant discharge standards.

4.3 Product manufacturers should strengthen clean production in the production process.

5 Technical content

6 One person can complete the disintegration. Machine

For example, when the undercut angle is greater than or equal to 90 degrees, can have multiple sliding in the same direction at the same time but it may not be broken down by one person. When necessary Decompose more than 3 slide-in combinations at the same time when deemed, it does not meet the requirements.

There are no electronic components on the housing. But solid the operating part that is fixed on the outer casing, and Housings that have a base function are not suitable.

Protective parts --

The production enterprise shall be as follows from 1 to 7 the order was disintegrated and recorded point.

Machine --

material

Selection

Choose

mark

Plastic parts with similar functions only make Use 1 material. Reused parts are not be applicable.

More than 25g of defense Protective parts, base, Mechanical Parts "Similar function" means "impact resistance", "Abrasion resistance" and other functions.

10 Plastics with a mass greater than 25g should use a monomer or copolymer. shell--

Made of a plastic case with a mass greater than 25g the type of monomer or copolymer used is not it should be more than 4 types and easy to disintegrate.

shell--

HJ -----201-

Classification number requires object description

Table with mass greater than 25g and maximum plane

Plastic parts with an area exceeding.200mm2 According to the requirements of GB/T 16288 Remember.

Plastic parts --

For the label on the product casing that is not easy to peel off Sign, should use the same as the paste Material or material that does not affect recycling material.

label--

14 Plastic housing parts must not be plated. shell--

(a) Painting of plastic parts is limited to to be minimal (example manufacturer name).

Laser marking, etc. are not included in this project.

And "painting". Reused parts are not be applicable.

Protective parts, drum the powder box and ink tank coating include a paint layer, an evaporation layer, and printing.

(b) During the painting process, it should be used.

Resist the paint. Recommended to improve the coating Labor safety and health strip and reduce environmental load.

Protective parts, drum Powder box, ink tank "Coating material that does not hinder reuse" means painted Parts and materials are compatible with the coating, coated it does not hinder the reuse of product materials.

"Improving the safety of the painting workers "conditions" refers to the ventilation of the painting workplace Wind and workers should use protective equipment.

"Reducing environmental load" means reducing to the atmosphere Discharge VOC, in the setting of the processing equipment, the painting process is laid out and used low VOC discharges paint, etc.

As long as any one of (a) and (b) is satisfied.

17 Use of renewable materials and materials to connect

Protective parts, bottom Block, toner cartridge prevention Protective parts, ink tank Protective parts "Recyclable materials" means that they can be used for raw Production of the same recycled materials as the starting materials Use on the level).

And, this project only examines the design intent and purpose.

The standard does not examine whether it has been recycled.

Allow the use of recycled plastic as raw material a part of.

(Inkjet printer is not applicable) Protective parts, bottom Seat, toner cartridge "Allow" means according to the design requirements of the product, as long as it is a material that meets the conditions, it can be made use. "Partial" means the presence of the corresponding plastic zero Piece is OK (not necessarily for all parts).

19 Parts and materials in Schedule A.1 are easily removed. Machine --

20 Based on the records from 15 to 19, the material selection was recorded.

Housing, base, drum

Powder box ink box --HJ -----201-Classification number requires object description long use in addition to standard parts in addition, more than 50% of the parts can be used for this system.

The same generation of manufacturers, the same performance His products.

Machine --

May allow and remanufacture (reprocessed) module or reuse Parts (not for inkjet printers).

Machine

The manufacturer should allow reuse. Its purpose can is the repair spare part or the same quality as the new zero Equivalent to new.

23 Toner cartridges and ink cartridges can be reused

Toner cartridge, ink Box, simple container except it means that the design should not hinder reuse.

Schedule A.1 Shaped articles, chemicals and parts to be separated *Capacitor with PCB *Uses mercury-containing parts like lamps for backlights *battery * Printed circuit board with an area of more than 10cm2 * Toner cartridge, powder, color paste, liquid toner. Also includes color toner.

*Used plastic parts containing brominated flame retardants * LCD screen with an area of more than 100cm2 (sometimes fixed on the case) *External power cord * Capacitors containing hazardous substances (height > 25mm, diameter > 25mm or volume close to this) HJ -----201-Appendix B (normative appendix) Phthalate banned in plastic parts Chinese name English name abbreviation Diisoisophthalate Di-iso-nonylphthalate DINP Di-n-octylphthalate DNOP Di-(2-ethylhexy)-phthalate DEHP Diisoisylphthalate DIDP Butylbenzylphthalate BBP Dibutylphthalate DBP HJ -----201-Appendix C (normative appendix) Restricted use of polycyclic aromatic hydrocarbons (PAHs) Chinese name English name abbreviation Naphthalene Napene Nap Terenaphthylene AcPy 苊Acenaphthene Acp 芴Fluorene Flu Philippine Phenanthrene PA 蒽Anthracene Ant Fluoranthine Fluoranthene FL 芘Pyrene Pyr 1,2-benzophenanthrene Chrysene CHR Benzo(a)蒽Benzo[a]anthracen BaA Benzo(b)fluoranthene Benzo[b]fluoranthene BbF Benzo(k)fluoranthene Benzo[k]fluoranthene BkF Benzo(a)芘Benzo[a]pyrene BaP Dibenzo[a, h)蒽Dibenzo[a,h]anthrancene DBA 茚(1,2,3-cd)芘Indeno[1,2,3-cd]pyrene IND Benzo(g,h,i) (perylene) Benzo[g,h,i]perylene BghiP HJ -----201-Appendix D (normative appendix) Inspection procedures...