HJ 1104-2020Technical specification for application and issuance of pollutant permit - Daily chemical products manufacturing industry (English PDF)

3.1 Pollutant emission unit of daily chemical products

manufacturing industry Refers to the sewage disposal unit engaged in the manufacture of soap and detergents, spices, flavors and other products.

The manufacture of soap and detergent refers to applying to the skin, utensils, fabrics, hard surfaces by spraying, smearing, soaking, etc.

Rinse and wash, it has the functions of cleaning, decontamination, penetration, emulsification, dispersion, care, disinfection and sterilization. It is widely used in household, Products in the fields of personal hygiene, fabric cleaning and care, industrial cleaning, public facilities and environmental hygiene cleaning (solid, liquid,

3) Manufacturing of powders, pastes, tablets, capsules, etc.).

Spice manufacturing refers to the production of materials with aroma and (or) fragrance, including natural and synthetic fragrances, for blending Fragrance and other uses.

Flavor manufacturing refers to the use of a variety of natural flavors and (or) synthetic flavors as the main raw materials, together with other auxiliary materials according to reasonable A complex mixture with a certain scent prepared by the formula and craftsmanship, mainly used for daily use, edible and other flavored products Production Activities.

3.2 Natural fragrance and flavor ingredient

Using plants, animals, microorganisms or intermediates obtained from processing as raw materials, through physical methods, enzymatic methods, microbial methods or Spices processed by traditional food technology.

3.3 Synthetic fragrance and flavor substance

Substances with clear aroma and/or fragrance characteristics formed by chemical synthesis.

3.4 Thermal reaction fragrance compound and flavorings

Using protein nitrogen sources, carbohydrate sources, fats or fatty acid sources as the main raw materials the product obtained from the reaction under certain conditions (specific temperature and time), with or without addition of spices and (or) permitted by regulations Excipients, complex mixtures with specific aromas and/or fragrances prepared by reasonable blending.

3.5 Non-methane hydrocarbons (NMHC)

Using the specified monitoring method, the hydrogen flame ionization detector responds to the total amount of gaseous organic compounds other than methane and, in terms of the mass concentration of carbon.

3.6 Permitted emission limits

Refers to the maximum discharge concentration (or discharge rate) and discharge volume of pollutants that are allowed to be discharged by the pollutant discharge unit as specified in the pollution discharge permit.

3.7 Special periods

Refers to the environmental quality compliance plan established by the local people's government in accordance with the law or other relevant environmental management documents.

The pollutant discharge situation of the polluting unit has special requirements, including the period of response to heavy pollution weather.

3.8 Production period

Refers to the period of time from the start of production to the end of each production season of the daily chemical product manufacturing industrial sewage unit, calculated on a daily basis.

4.1 Basic principles

The pollutant discharge unit of the daily chemical product manufacturing industry shall apply for the national pollutant discharge permit management information platform in accordance with the requirements of this standard.

Report the system to fill in the corresponding information table.

4 The local ecological and environmental authorities at or above the municipal level with districts may increase the the content specified in the permit, and fill in the "local health authority with the right to issue" in the declaration system of the national pollution discharge permit management information platform Management content added by the environmental and environmental authorities" column.

4.2 Basic information of pollutants

The basic information of the pollutant discharge unit in the daily chemical product manufacturing industry should be filled in with the name of the unit, whether it needs to be corrected, and the discharge permit management.

Management category, postal code, industry category, whether to start production, date of production, latitude and longitude of the center of the production Whether it belongs to an environmentally sensitive area (such as a key atmospheric control area, a total phosphorus and total nitrogen control area, etc.), whether it is located in an industrial park, Industrial park name, construction project environmental impact assessment document approval (review) comment number (record number), local government the document number of the identification or filing document of the illegal project, the document number of the total distribution plan of major pollutants, and the total particulate matter indicator (T/a), total sulfur dioxide indicator (t/a), total nitrogen oxide indicator (t/a), total chemical oxygen demand indicator (t/a), Total ammonia nitrogen indicator (t/a), total indicators of other pollutants involved, etc.

When filling in the industry category in the basic information on the national sewage permit management information platform, the daily chemical product manufacturing industry the pollutant discharge unit fills in "Chemical Raw Material and Chemical Product Manufacturing (C26)" and "Daily Chemical Product Manufacturing" according to the actual situation.

(C268)" "Soap and detergent manufacturing (C2681)", "Perfume and flavor manufacturing (C2684)" industry categories.

4.3 Main products and production capacity

4.3.1 General principles

Daily chemical product manufacturing industrial pollutants should fill in the name of the main production unit, main process name, and production facility name Scale, production facility number, facility parameters, product name, production capacity, unit of measurement, design year production time and others.

The following "4.3.2~4.3.6" are required items, and "4.3.7" are optional items.

4.3.2 Names of main production units, main processes and production facilities

The names of main production units, main processes and production facilities of household chemical products manufacturing industrial pollutants are shown in the table 1~Table 5.For the production of other products in the daily chemical product manufacturing industry, please refer to the report. The pollutant discharge unit needs to fill in the forms other than Form 1~ the production unit, production process and production facilities of the company can be filled in by selecting the "other" item in the declaration system.

4.3.3 Production facility number

Daily chemical product manufacturing industrial pollutant discharge unit shall fill in the internal production facility number, or number and fill in according to HJ 608.

4.3.4 Product name

a) Soap and detergent manufacturing 7.Soap, soap, soap powder, soap granules, synthetic washing powder, liquid detergent, etc.

b) Manufacturing of spices and flavors Natural flavors, synthetic flavors, thermally reactive flavors, non-thermally reactive flavors, and others.

4.3.5 Production capacity and measurement unit

Production capacity is the design capacity of the main products, excluding the capacity eliminated or banned by the state or local government. Production capacity the unit of force measurement is t/a.

4.3.6 Design year production time

According to the environmental impact assessment documents and their approval (review) opinions or in accordance with relevant national regulations Fill in the annual production time in the relevant certification materials that meet the requirements of the management and rectification. If there is no relevant document or the document is not clear to confirm the production time, fill in the actual production time.

4.3.7 Other

If the household chemical product manufacturing industrial pollutant discharge unit has other content that needs to be explained, it can add it by itself.

4.4 Main raw and auxiliary materials and fuels

4.4.1 General principles

The main raw and auxiliary materials and fuels should be filled with the types of raw and auxiliary materials and fuels, the designed annual usage and the unit of measurement, poisonous and harmful Substance composition and proportion, among which toxic and hazardous substances refer to the list of toxic and hazardous substances included in the "List of Priority Control Chemicals" Chemical substances. Fuel composition includes ash, sulfur, volatile, calorific value, and others. The following "4.4.2~4.4.5" are required Item, "4.4.6" is optional.

4.4.2 Types of raw and auxiliary materials and fuels

4.4.2.1 Raw and auxiliary materials

a) Soap and detergent manufacturing the types of raw materials include. grease, fatty acids, alkalis, surfactants, water softeners, and others.

The types of excipients include. water, sodium chloride, hydrochloric acid, fillers, pH adjusters, buffers, enzyme preparations, thickeners, Decolorant, coloring agent, flavor, fluorescent whitening agent, antioxidant, bactericide, chelating agent, calcium soap dispersant, anti-dirt re-sedimentation Accumulating agent, antistatic agent, softener, foam inhibitor, bleaching agent, solvent, cosolvent, preservative, etc.

4.4.2.2 Fuel

Fuel types include coal, heavy oil, diesel, natural gas, liquefied petroleum gas, biomass fuel, and others.

4.4.3 Designed annual usage and unit of measurement

The designed annual consumption is the annual consumption of raw and auxiliary materials and fuels that match the production capacity.

The unit of measurement for the designed annual consumption is t/a or Nm3/a.

4.4.4 Composition and proportion of toxic and hazardous substances in raw and auxiliary materials and fuels the composition and proportion of toxic and hazardous substances in raw and auxiliary materials and fuels shall be reported according to the design or actual production conditions of the previous year.

4.4.5 Fuel ash, sulfur, volatile and calorific value

For solid fuel, fill in ash, sulfur, volatile and calorific value (low calorific value), and not fill in volatile for biomass fuel Add water content. Fuel and gas only require sulfur content (liquid fuel is calculated as sulfur content; gas fuel is calculated as total sulfur, Total sulfur (including organic sulfur and inorganic sulfur) and calorific value (low calorific value) are filled in according to the design value or the actual production value of the previous year.

The reported value of solid fuel and liquid fuel is based on the received basis.

4.4.6 Other

Other content that needs to be explained by the industrial pollutant discharge unit of the daily chemical product manufacturing industry can be filled in.

4.5 Production and discharge nodes, pollutants and pollution control facilities

4.5.1 Wastewater

4.5.1.1 General principles

The type of wastewater, pollution control items, discharge destination, discharge rules, pollution control facilities, and whether it is a feasible technology should be reported.

Whether the technology, discharge port number, discharge port settings meet the requirements, and discharge port type. The following "4.5.1.2~4.5.1.6" are required items.

4.5.1.2 Types of wastewater, pollution control items and pollution control facilities

The category of waste water discharged by the industrial pollutant discharge unit in the manufacture of daily chemical products, pollution control items, discharge methods and pollution control equipment See Table 6 for the contents of the application. Among them, pollution control items are determined according to GB 8978.Where there are stricter emission standards requirements, Follow its regulations.

4.5.1.3 Emission destination and emission law

The pollutant discharge unit of the daily chemical product manufacturing industry shall clarify the destination and discharge rules of wastewater discharge.

The discharge destination is divided into no discharge; directly into the water environment of rivers, lakes, reservoirs, etc.; directly into the sea; into the urban water Road (re-entering rivers, lakes, reservoirs); entering urban sewers (re-entering coastal waters); entering urban sewage treatment facilities;

Enter other units; enter industrial wastewater centralized treatment facilities; others.

Fill in the discharge rule when the wastewater enters the environmental water body directly or indirectly, and do not need to fill it when it is not discharged. Wastewater discharge law class Don't see HJ 521.

4.5.1.4 Number of pollution control facilities and discharge outlets

9 Pollution treatment facility serial number can be filled in the internal serial number of the pollutant discharge unit of the daily chemical product manufacturing industry, or entered according to HJ 608 Line number and fill in.

Fill in the existing number of the local ecological environment authority for the wastewater discharge port number. If not, fill in the internal serial number of the sewage disposal unit or number and fill in according to HJ 608.

The number of the rainwater discharge outlet can be filled in the internal number of the sewage discharge unit, or use "YS three-digit serial number" (such as YS001) Number and fill in.

4.5.1.5 Standardized setting of discharge ports

According to "Technical Requirements for Standardized Remediation of Sewage Outlets (Trial)", relevant local management requirements, and daily chemical products the regulations on the standardized setting of discharge outlets in the discharge standards implemented by the pollutant discharge units of the manufacturing industry.

Whether it meets the standardization requirements.

4.5.1.6 Type of discharge port

The total discharge outlet of wastewater from the industrial pollutant discharge unit that implements key management of daily chemical product manufacturing industry (discharge from comprehensive sewage treatment station) ) is the main discharge port, and other wastewater discharge ports are general discharge ports. Daily chemical product manufacturers with simplified management ...