HG/T 4802-2015Ring tread building machines (English PDF)
环形胎面贴合机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4802-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
HG/T 4802-2015 is the English-translated version of 环形胎面贴合机.
The ring tread building machine is covered by HG/T 4802-2015, a recommended standard issued in the Chinese chemical industry series for rubber machinery.
It sets out terms and definitions, the models and basic parameters of the machine, the requirements, the testing, the inspection rules and the provisions for marking, packaging, transport and storage.
The machines in scope are the annular tread building machines used to fit a ring of tread in tyre retreading. Safety and construction requirements are drawn from GB 2894, GB 4208-2008, GB 5226.1-2008 and GB/T 7932-2003, with GB/T 13306 and GB/T 13384, and HG/T 2108, HG/T 3120 and HG/T 3228-2001 from the rubber machinery series. Issued on 30 April 2015, it has applied since 1 October 2015.
Found what you need?
Document preview — HG/T 4802-2015
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4802-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The ring tread building machine is covered by HG/T 4802-2015, a recommended standard issued in the Chinese chemical industry series for rubber machinery. It sets out terms and definitions, the models and basic parameters of the machine, the requirements, the testing, the inspection rules and the provisions for marking, packaging, transport and storage. The machines in scope are the annular tread building machines used to fit a ring of tread in tyre retreading. Safety and construction requirements are drawn from GB 2894, GB 4208-2008, GB 5226.1-2008 and GB/T 7932-2003, with GB/T 13306 and GB/T 13384, and HG/T 2108, HG/T 3120 and HG/T 3228-2001 from the rubber machinery series.
HG/T 4802-2015 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191
GB 2894
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB/T 7932-2003 — Pneumatic fluid power - General rules relating to systems
GB/T 12783
GB/T 13306
GB/T 13384
GB/T 24343
GB/T 24344
HG/T 2108
HG/T 3120
HG/T 3228-2001 — General technical specifications for painting of rubber and plastics machinery
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
HG/T 4801-2015 — Ring tread curing presses
HG/T 4800-2015 — X-ray inspection machines for tyres
HG/T 4799-2015 — Tyre uniformity testing machines
6 Classification and status
International classification (ICS): 71.120
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 2894Safety colours and safety signs
- GB 4208-2008Degrees of Protection Provided By Enclosure (IP Code)
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6388Transport package shipping mark
- GB/T 7932-2003Pneumatic fluid power -- General rules and safety requirements for systems and their components
Similar standards
How to Download HG/T 4802-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 4802-2015
$165.00