HG/T 4750-2014Plastics welding machinery and tools - Extrusion welding guns (English PDF)
塑料焊接机具 挤出焊枪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4750-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 24, 2014
Implementation date
June 1, 2015
Scope
HG/T 4750-2014 is the English-translated version of 塑料焊接机具 挤出焊枪.
Extrusion welding guns are the subject of HG/T 4750-2014, part of the chemical industry series on plastics welding machinery and tools. The standard gives the terms and definitions for this equipment together with the product description, the requirements, the test methods, the inspection rules and the marking, packaging, transport and storage.
Polypropylene is named among the materials the guns are meant to weld. Safety and construction are referred to GB 2894, GB 3883.1, GB/T 4583, GB/T 5013.4, GB 5226.1 and GB/T 11918. Issued on 24 December 2014, it has applied since 1 June 2015.
Found what you need?
Document preview — HG/T 4750-2014
National Standard of the People's Republic of China
- ICS
- 71.120.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4750-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 December 2014 and has been in force since 1 June 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Extrusion welding guns are the subject of HG/T 4750-2014, part of the chemical industry series on plastics welding machinery and tools. The standard gives the terms and definitions for this equipment together with the product description, the requirements, the test methods, the inspection rules and the marking, packaging, transport and storage. Polypropylene is named among the materials the guns are meant to weld. Safety and construction are referred to GB 2894, GB 3883.1, GB/T 4583, GB/T 5013.4, GB 5226.1 and GB/T 11918.
HG/T 4750-2014 falls under ICS 71.120.99, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 2894
GB 3883.1
GB/T 4583
GB/T 5013.4
GB 5226.1
GB/T 11918
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 2056-2026 — Laminated glass-lined steel condenser
HG/T 4751-2014 — Plastics welding machinery and tools - Hot-gas welding guns
6 Classification and status
International classification (ICS): 71.120.99
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 2894Safety colours and safety signs
- GB 3883.1Safety of hand-held motor-operated electric tools -- Part 1: General requirements
- GB/T 4583Measurement of noise emitted by electric tools - Engineering method
- GB/T 5013.4Rubber insulated cables of rated voltages up to and including 450/750V -- Part 4: Cords and flexible cables
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 11918Industrial plugs and sockets and couplers - Part 1: General requirements
Similar standards
How to Download HG/T 4750-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 4750-2014
$120.00