HG/T 4617-2014Esterification resin catalysts (English PDF)
酯化树脂催化剂
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4617-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
HG/T 4617-2014 is the English-translated version of 酯化树脂催化剂.
Esterification resin catalysts are the subject of HG/T 4617-2014, a recommended Chinese chemical industry standard. It fixes the requirements for the catalyst and describes the test methods and inspection rules, along with marking, packaging, transport and storage.
The catalyst within its scope is a sulfonated resin obtained by polymerizing styrene with divinylbenzene and then esterifying it. It is classified G71 in the Chinese system and 71.100.40 internationally.
The standard cites a long list of supporting documents, among them GB/T 5475-1985, GB/T 5476-1996, GB/T 5757-2008, GB/T 5758-2001, GB/T 8144-2008, GB/T 8330-2008, GB/T 8331-2008, GB/T 12598-2001 and GB/T 13659-2008. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — HG/T 4617-2014
National Standard of the People's Republic of China
- ICS
- 71.100.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4617-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Esterification resin catalysts are the subject of HG/T 4617-2014, a recommended Chinese chemical industry standard. It fixes the requirements for the catalyst and describes the test methods and inspection rules, along with marking, packaging, transport and storage. The catalyst within its scope is a sulfonated resin obtained by polymerizing styrene with divinylbenzene and then esterifying it. It is classified G71 in the Chinese system and 71.100.40 internationally. The standard cites a long list of supporting documents, among them GB/T 5475-1985, GB/T 5476-1996, GB/T 5757-2008, GB/T 5758-2001, GB/T 8144-2008, GB/T 8330-2008, GB/T 8331-2008, GB/T 12598-2001 and GB/T 13659-2008.
HG/T 4617-2014 falls under ICS 71.100.40, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 603-2002 — Chemical reagent - Preparations of reagent solutions for use in test methods
GB/T 5475-1985 — Methods for sampling ion exchange resins
GB/T 5476-1996 — Methods for pretreating ion exchange resins
GB/T 5757-2008 — Determination of water content of ion exchange resins
GB/T 5758-2001 — Determination for particle size range, effective size and uniformity coefficient of ion exchange resins
GB/T 6003.1-1997 — Test sieves of metal wire cloth
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 8144-2008 — Determination of exchange capacity of cation exchange resins
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 8330-2008 — Determination of specific gravity of ion exchange resins in wet state
GB/T 8331-2008 — Determination of bulk density of ion exchange resins in wet state
GB/T 12598-2001 — Determination for sphericity of ion exchange resins after attrition of osmotic attrition
GB/T 13659-2008 — 001×7 Strong acid polystyrene cation exchange resin
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 21840-2025 — Vulcanizing accelerator — N-tert-butyl-1,3-benzothiazole-2-sulfenamide (TBBS)
GB/T 8826-2019 — Rubber antioxidant—Polymerized 2,2,4-trimethyl-1,2-dihydroquinoline (TMQ)
HG/T 3643-1999 — Chlorinated paraffins-70
HG/T 4616-2023 — Plasticizer Acetyl tributyl citrate (ATBC)
HG/T 4615-2023 — Plasticizer Tributyl Citrate (TBC)
HG/T 4610-2014 — Rubber processing aids - Pine tar
6 Classification and status
International classification (ICS): 71.100.40
Chinese Standard Classification (CCS): G 71
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 603-2002Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 5475-1985Methods for sampling ion exchange resins
- GB/T 5476-1996Methods of pretreating ion exchange resins
- GB/T 5757-2008Determination of water content of ion exchange resins
- GB/T 5758-2001Determination of particle size, effective size and uniformity coefficient of ion exchange resins
Similar standards
How to Download HG/T 4617-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12598-2001 — Determination for sphericity of ion exchange resins after attrition of osmotic attrition
GB/T 13659-2008 — 001×7 Strong acid polystyrene cation exchange resin
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
HG/T 4617-2014
$100.00