HG/T 4542-2013Circulating cooling water - Determination of polyepoxysuccinic acid content (English PDF)
循环冷却水中聚环氧琥珀酸含量测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4542-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
HG/T 4542-2013 is the English-translated version of 循环冷却水中聚环氧琥珀酸含量测定.
HG/T 4542-2013 is the recommended chemical industry standard of China for determining the polyepoxysuccinic acid content of circulating cooling water. It sets out a spectrophotometric determination of that content and applies to circulating cooling water systems in which polyepoxysuccinic acid is dosed as a scale and corrosion inhibitor.
Knowing that content matters because the dose has to be followed while the water is in service. The standard sits under the Chinese classification G76 and the international class 71.040.40, with GB/T 6682-2008 quoted for the grade of water used in the analysis. Issued on 17 October 2013, it has applied since 1 March 2014.
Found what you need?
Document preview — HG/T 4542-2013
National Standard of the People's Republic of China
- ICS
- 71.040.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4542-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended chemical industry standard of China for determining the polyepoxysuccinic acid content of circulating cooling water. It sets out a spectrophotometric determination of that content and applies to circulating cooling water systems in which polyepoxysuccinic acid is dosed as a scale and corrosion inhibitor. Knowing that content matters because the dose has to be followed while the water is in service. The standard sits under the Chinese classification G76 and the international class 71.040.40, with GB/T 6682-2008 quoted for the grade of water used in the analysis.
HG/T 4542-2013 falls under ICS 71.040.40, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water
GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule
GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness
HG/T 3610-2026 — General principles for sludge and corrosion product analytical methods of industrial circulating cooling water
HG/T 4543-2013 — Water treatment chemicals - Determination of corrosion inhibition performance - Potentiodynamic polarization curve method
HG/T 4541-2013 — Water treatment chemicals - Determination of scale inhibition performance - Limiting carbonate method
6 Classification and status
International classification (ICS): 71.040.40
Chinese Standard Classification (CCS): G 76
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download HG/T 4542-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
HG/T 2016-2026 — Rubber-soled sports shoes for basketball and volleyball
HG/T 2018-2026 — Lightweight rubber shoes
HG/T 4542-2013
$105.00