Valid

HG/T 4342-2012Zinc flake primers (English PDF)

鳞片型锌粉底漆

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4342-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

November 7, 2012

Implementation date

March 1, 2013

Scope

HG/T 4342-2012 is the English-translated version of 鳞片型锌粉底漆.

HG/T 4342-2012 is the Chinese chemical industry standard, recommended in status, for zinc flake primers. It sets the product classification, the requirements, the test methods, the inspection rules and the rules on marking, packaging and storage.

The primers in question are pigmented with zinc in flake form, which may also contain spherical zinc, and are bound with either inorganic or organic binders. Testing is carried out with reference to GB/T 1725, GB/T 1732, GB/T 1771, GB/T 5210, GB/T 8923, GB/T 9271, GB/T 13288.1 and HG/T 3668, among others. Issued on 7 November 2012, it has applied since 1 March 2013.

Found what you need?

Document preview — HG/T 4342-2012

National Standard of the People's Republic of China

ICS
87.040

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4342-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the Chinese chemical industry standard, recommended in status, for zinc flake primers. It sets the product classification, the requirements, the test methods, the inspection rules and the rules on marking, packaging and storage. The primers in question are pigmented with zinc in flake form, which may also contain spherical zinc, and are bound with either inorganic or organic binders. Testing is carried out with reference to GB/T 1725, GB/T 1732, GB/T 1771, GB/T 5210, GB/T 8923, GB/T 9271, GB/T 13288.1 and HG/T 3668, among others.

HG/T 4342-2012 falls under ICS 87.040, in the field of paint and colour industries.

This catalogue holds 140 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 1725-2007 — Paints, varnishes and plastics -- Determination of non-volatile-matter content

GB/T 1728-1979 — Methods of test for drying time of coatings of paints and putties

GB/T 1732-1993 — Determination of impact resistance of film

GB/T 1771-2007 — Paints and Varnishes -- Determination of resistance to neutral salt spray (fog)

GB/T 3186

GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion

GB/T 6750-2007 — Paints and varnishes -- Determination of density -- Pycnometer method

GB/T 8170

GB/T 8923

GB/T 9271-2008 — Paints and varnishes standard panels for testing

GB/T 9278

GB/T 9750

GB/T 13288.1

GB/T 13491

GB/T 16906-1997 — Standard test methods for electrical resistivity of antistatic coating in petroleum tanks

HG/T 3668-2009 — Zinc-rich primers

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

HG/T 3952-2007 — Cathodic electrodeposition coatings

GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling

GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion

HG/T 4343-2024 — Waterborne multicolor architectural coatings

HG/T 4339-2024 — Coatings for machinery and equipment

HG/T 4346-2022 — Chlorinated rubber resins for coatings

6 Classification and status

International classification (ICS): 87.040

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

How to Download HG/T 4342-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4342-2012

$105.00