Valid

HG/T 4207-2011Industrial circulating cooling water - Determination of heterotrophic bacteria count - Plate count method (English PDF)

工业循环冷却水异养菌菌数测定 平皿计数法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4207-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 4207-2011 is the English-translated version of 工业循环冷却水异养菌菌数测定 平皿计数法.

HG/T 4207-2011 is the Chinese chemical industry standard that sets out the plate count method for the examination of heterotrophic bacteria in industrial circulating cooling water.

It describes how the count is carried out, so that the bacterial population of a cooling circuit can be measured on a common basis. The method is written for industrial circulating cooling water, and it also serves for the determination of heterotrophic bacteria in raw water, domestic water and other waters.

Preparation of standard solutions follows GB/T 603 and laboratory water follows GB/T 6682, the two documents it quotes. It carries Chinese classification G76 and ICS 13.060.70, and was issued by the Ministry of Industry and Information Technology. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 4207-2011

National Standard of the People's Republic of China

ICS
13.060.70

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4207-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the Chinese chemical industry standard that sets out the plate count method for the examination of heterotrophic bacteria in industrial circulating cooling water. It describes how the count is carried out, so that the bacterial population of a cooling circuit can be measured on a common basis. The method is written for industrial circulating cooling water, and it also serves for the determination of heterotrophic bacteria in raw water, domestic water and other waters. Preparation of standard solutions follows GB/T 603 and laboratory water follows GB/T 6682, the two documents it quotes. It carries Chinese classification G76 and ICS 13.060.70, and was issued by the Ministry of Industry and Information Technology.

HG/T 4207-2011 falls under ICS 13.060.70, in the field of environment and health protection, safety.

This catalogue holds 95 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 603

GB/T 6682

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water

GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule

GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness

HG/T 6400-2025 — Determination of zinc stabilization performance of water treatment chemicals - Zinc salt precipitation method

HG/T 6399-2025 — Test method for scale inhibition performance of scale inhibitors for high temperature water systems - Particle size distribution

HG/T 6398-2025 — Determination method for performance of polyamine boiler water treatment chemicals

6 Classification and status

International classification (ICS): 13.060.70

Chinese Standard Classification (CCS): G 76

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4207-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4207-2011

$115.00