HG/T 4169-2011Non-contact metal honeycomb seals (English PDF)
非接触金属蜂窝密封
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4169-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4169-2011 is the English-translated version of 非接触金属蜂窝密封.
HG/T 4169-2011 is the Chinese chemical industry standard for non-contact metal honeycomb seals. It gives the terms and definitions for these seals and sets their requirements, test methods and inspection rules, along with the provisions for marking, packaging, transport and storage.
Its subject is the non-contact mechanical honeycomb metal seal fitted to centrifugal compressors, blowers, steam turbines and gas turbines, on shaft diameters from 50 mm to 1000 mm.
Chinese classification G91 and international classifications 71.120.10 and 21.140 place it with chemical machinery and sealing devices. It is applied with GB/T 699, GB/T 3077, GB/T 8117.1, GB/T 10859, GB/T 14100 and JB/T 3165. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 4169-2011
National Standard of the People's Republic of China
- ICS
- 71.120.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4169-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for non-contact metal honeycomb seals. It gives the terms and definitions for these seals and sets their requirements, test methods and inspection rules, along with the provisions for marking, packaging, transport and storage. Its subject is the non-contact mechanical honeycomb metal seal fitted to centrifugal compressors, blowers, steam turbines and gas turbines, on shaft diameters from 50 mm to 1000 mm. Chinese classification G91 and international classifications 71.120.10 and 21.140 place it with chemical machinery and sealing devices.
HG/T 4169-2011 falls under ICS 71.120.10, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191
GB/T 699
GB/T 3077
GB/T 8117.1
GB/T 8117.2
GB/T 10859
GB/T 14100
GB/T 20878
GJB 3318A
JB/T 3165
GB/T 3280
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 29465-2023 — Flange of floating heat exchangers
HG/T 2100-2020 — Mechanical seals for liquid ring chlorine pumps
HG/T 2099-2020 — Test code for mechanical seals of stirred vessels
HG/T 2044-2020 — Plasma-sprayed chromium oxide seal rings for mechanical seals - Technical specifications
6 Classification and status
International classification (ICS): 71.120.10
Chinese Standard Classification (CCS): G 91
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 699Quality carbon structure steels
- GB/T 3077Alloy Structure Steels
- GB/T 8117.1Rules for steam turbine thermal acceptance tests -- Part 1: Method A -- High accuracy for large condensing steam turbines
- GB/T 8117.2Rules for steam turbine thermal acceptance tests - Part 2: Wide range of accuracy for various types and sizes of turbines
- GB/T 10859Nickel base brazing filler metals - Part 1: Solid brazing filler metals
GJB 3318A
Similar standards
How to Download HG/T 4169-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10859.1-2025 — Nickel base brazing filler metals - Part 1: Solid brazing filler metals
GB/T 10859-1989 — Nickel base brazing filler metals
GB/T 10859-2008 — Nickel base brazing filler metals - Part 1: Solid brazing filler metals
HG/T 4169-2011
$120.00