Valid

JB/T 13464-2018Non-destructive testing - Flash-excited infrared thermography - Testing of honeycomb sandwich structures (English PDF)

无损检测 闪光灯激励红外热像法 蜂窝夹层结构检测

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 13464-2018 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 30, 2018

Implementation date

December 1, 2018

Scope

JB/T 13464-2018 is the English-translated version of 无损检测 闪光灯激励红外热像法 蜂窝夹层结构检测.

JB/T 13464-2018 is the Chinese machinery industry standard covering non-destructive testing - Flash-excited infrared thermography - Testing of honeycomb sandwich structures.

It was issued on 30 April 2018 and has been in force since 1 December 2018, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.

This page is published from the official record of the 2018 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 13464-2018

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 13464-2018 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2018 and has been in force since 1 December 2018.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

JB/T 13464-2018 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Standards on related subjects:

GB/T 13319-2020 — Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification

GB/T 12716-2011 — Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads

JB/T 6063-2006 — Non-destructive testing - Materials for magnetic particle testing

JB/T 13466-2018 — Non-destructive testing - Test method for determination of joint penetration by phased array ultrasonics

JB/T 13465-2018 — Non-destructive testing - Test method for low power microfocus X-ray digital radiography

JB/T 13463-2018 — Non-destructive testing - Fabrication and verification of blocks for angle beam ultrasonic testing

5 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 13464-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 13464-2018

$270.00