GB/T 26643.3-2015Non-destructive testing - Infrared flash thermography - Part 3: Blocks (English PDF)
无损检测 闪光灯激励红外热像法 第3部分:试块
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26643.3-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 9, 2015
Implementation date
June 1, 2016
Scope
GB/T 26643.3-2015 is the English-translated version of 无损检测 闪光灯激励红外热像法 第3部分:试块.
GB/T 26643.3-2015 is the Chinese standard "Non-destructive testing - Infrared flash thermography - Part 3: Blocks". Its scope clause reads: GB/T 26643 provisions of this part of the flash incentive infrared thermography for detecting the type of the test piece, technical requirements and test methods.
Its clauses include terms and definitions; test block type; technical requirements.
Found what you need?
Document preview — GB/T 26643.3-2015
National Standard of the People's Republic of China
- ICS
- 19.100
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 test block type
- 5 Technical requirements
- 6 Test Method
- 7 Inspection Item
- 8 numeral
1 Scope
GB/T 26643 provisions of this part of the flash incentive infrared thermography for detecting the type of the test piece, technical requirements and test methods.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 12604.9 Terminology for nondestructive testing infrared detector
GB/T 20737 Non-destructive testing - General terms and definitions
GB/T 26643 NDT flash incentive Thermal imaging guidance
3 Terms and Definitions
GB/T 12604.9, terms and definitions GB/T 20737 and GB/T 26643.1 defined apply to this document.
4 test block type
Test block is divided into two types. standard test blocks and test block. Among them, the standard test block is divided into test block detection capability and thermal excitation uniformity inspection
Test block.
Detection capability test pieces for the evaluation of thermal imaging infrared excitation flash detection system capability can also be used to periodically check the status of equipment performance.
Uniformity of thermal excitation detection test for measuring the flash excitation block infrared thermal image detection system thermal excitation uniformity, can be used to regularly check
Pulse excitation source heat uniformity.
Reference block is used to set the flash excitation infrared thermal image detection system parameters, and measurement and defect recognition. Based on the detection head , The reference block may contain known defects test block, known defects can be a natural defect or artificial defects.
5 Technical requirements
5.1 detection capability test block
5.1.1 Materials
Produced by homogeneous material from the following two.
a) a metal thermal diffusion coefficient should be between 4 × 10-5m2/s ~ 9 × 10-5m2/s, such as. surface anodized (black) process
Aluminum;
b) a non-metallic thermal diffusion coefficient should be in the range of 2 × 10-7m2/s ~ 5 × 10-7m2/s, such as. black Bakelite.
5.1.2 shapes and sizes
Test block shape is rectangular plates, flat bottom hole in the back of the processing has different depths and sizes (see 5.1.3).
There are two types of test pieces, I type specimen shape and dimensions shown in Figure 1, the shape and size of type II test block shown in Figure 2.
GB/T 26641-2021 | GB/T 28784.2-2014 | GB/T 28619-2012 | GB/T 26642-2022 | GB/T 26643-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26643.3-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26643.3-2015
$185.00