HG/T 4142-2010Plastic drainage cover plates (English PDF)
塑胶排水盖板
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4142-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 22, 2010
Implementation date
March 1, 2011
Scope
HG/T 4142-2010 is the English-translated version of 塑胶排水盖板.
HG/T 4142-2010 is the recommended chemical industry standard of China for plastic drainage cover plates. It belongs to Chinese classification G47 and to international classification 83.140.99, the group that gathers the other rubber and plastics products, so its subject is a finished polymer component rather than a test procedure.
The work it calls on is a set of general polymer standards, GB/T 1681, GB/T 2941, GB/T 3511, GB/T 3512, GB/T 10654, GB/T 13936 and GB/T 14833, which govern how specimens are conditioned and how ageing and physical properties are measured.
The Ministry of Industry and Information Technology is the issuing agency. Issued on 22 November 2010, it has applied since 1 March 2011.
Found what you need?
Document preview — HG/T 4142-2010
National Standard of the People's Republic of China
- ICS
- 83.140.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 4142-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 November 2010 and has been in force since 1 March 2011.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended chemical industry standard of China for plastic drainage cover plates. It belongs to Chinese classification G47 and to international classification 83.140.99, the group that gathers the other rubber and plastics products, so its subject is a finished polymer component rather than a test procedure. The work it calls on is a set of general polymer standards, GB/T 1681, GB/T 2941, GB/T 3511, GB/T 3512, GB/T 10654, GB/T 13936 and GB/T 14833, which govern how specimens are conditioned and how ageing and physical properties are measured. The Ministry of Industry and Information Technology is the issuing agency.
HG/T 4142-2010 falls under ICS 83.140.99, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1681
GB/T 2941
GB/T 3511
GB/T 3512
GB/T 10654
GB/T 13936
GB/T 14833
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 14833-2020 — Synthetic materials sports field surfaces
HG/T 4070-2008 — Silicone rubber sheets
GB/T 5574-2008 — Industrial rubber sheet
HG/T 6323-2024 — Two-piece can coloring rubber rollers
HG/T 2821.1-2023 — Dipped polyester cords for V-belts and V-ribbed belts - Part 1: Stiff cords
HG/T 2793-2023 — Conductive and antistatic rubber sheets for industrial use
6 Classification and status
International classification (ICS): 83.140.99
Chinese Standard Classification (CCS): G 47
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1681Rubber -- Determination of rebound resilience of vulcanizates
- GB/T 2941Rubber - General procedures for preparing and conditioning test pieces for physical test methods
- GB/T 3511Rubber, vulcanized or thermoplastic -- Resistance to weathering
- GB/T 3512Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests in hot air
- GB/T 10654Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
- GB/T 13936Rubber,vulcanized-Method for determination of strength properties of adhesive to metal in shear by tension loading
Similar standards
How to Download HG/T 4142-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10654-1989 — Polymeric materials, cellular flexible--Determination of tensile strength and elongation at break
GB/T 10654-2001 — Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
GB/T 13936-1992 — Rubber, vulcanized. Method for determination of strength properties of adhesive to metal in shear by tension loading
HG/T 4142-2010
$85.00