Valid

JB/T 8746.5-2008Components of plastics profile extrusion dies - Part 5: Calibration blocks (English PDF)

塑料异型材挤出模零件 第5部分:定型块

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8746.5-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 4, 2008

Implementation date

November 1, 2008

Scope

JB/T 8746.5-2008 is the English-translated version of 塑料异型材挤出模零件 第5部分:定型块.

JB/T 8746.5-2008 is the Chinese machinery industry standard covering components of plastics profile extrusion dies, Part 5: Calibration blocks. It was issued on 4 June 2008 and has been in force since 1 November 2008, replacing JB/T 8746.5-1998.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2008 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 8746.5-2008

National Standard of the People's Republic of China

Replacing
JB/T 8746.5-1998

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 8746.5-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.

It replaces the earlier edition JB/T 8746.5-1998.

It is one of 14 parts of the JB/T 8746 series.

2 Scope Preview

JB/T 8746.5-2008 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

JB/T 8746-2025 — Plastic profile extrusion die - Component

JB/T 8746.1-1998 — Rectangular die plates

JB/T 8746.1-2008 — Part 1: Rectangular die plates

JB/T 8746.2-1998 — Round die plates

JB/T 8746.2-2008 — Part 2: Round die plates

JB/T 8746.3-1998 — Rectangular die bases

JB/T 8746.3-2008 — Part 3: Rectangular adapters

JB/T 8746.4-1998 — Round die bases

JB/T 8746.4-2008 — Part 4: Round adapters

JB/T 8746.6-1998 — Profile plates

JB/T 8746.6-2008 — Part 6: Die plates

JB/T 8746.7-1998 — T-pins

JB/T 8746.7-2008 — Part 7: Locating parts

Other editions:

JB/T 8746.5-1998 (earlier edition)

Standards on related subjects:

GB/T 45677-2025 — Forming moulds of composite material for upper cover of new energy vehicle battery pack

GB/T 6110-2021 — Drawing dies—Carbide alloy drawing dies—Structural types and dimensions

JB/T 6057-1992 — Steels for moulding parts of plastic moulds and their heat treatment - Technical specifications

JB/T 8745-2025 — Plastic profile extrusion die - Technical Specifications

JB/T 8744-2008 — Plastics extrusion dies - Terminology

5 Classification and status

Chinese Standard Classification (CCS): J 46

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 8746.5

EditionTitleRevisionStatus
JB/T 8746.5-2008Components of plastics profile extrusion dies - Part 5: Calibration blockscurrent editionCurrent
JB/T 8746.5-1998Components of plastics profile extrusion dies - Part 5: Calibration blocksprevious editionSuperseded

This page sells the current edition, JB/T 8746.5-2008. Earlier editions are listed for reference only.

How to Download JB/T 8746.5-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8746.5-2008

$55.00