JB/T 8746.6-2008Components of plastics profile extrusion dies - Part 6: Die plates (English PDF)
塑料异型材挤出模零件 第6部分:型板
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8746.6-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 8746.6-2008 is the English-translated version of 塑料异型材挤出模零件 第6部分:型板.
JB/T 8746.6-2008 is the Chinese machinery industry standard covering components of plastics profile extrusion dies, Part 6: Die plates. It was issued on 4 June 2008 and has been in force since 1 November 2008, replacing JB/T 8746.6-1998.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2008 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 8746.6-2008
National Standard of the People's Republic of China
- Replacing
- JB/T 8746.6-1998
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 8746.6-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 8746.6-1998.
It is one of 14 parts of the JB/T 8746 series.
2 Scope Preview
JB/T 8746.6-2008 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 8746-2025 — Plastic profile extrusion die - Component
JB/T 8746.1-1998 — Rectangular die plates
JB/T 8746.1-2008 — Part 1: Rectangular die plates
JB/T 8746.2-1998 — Round die plates
JB/T 8746.2-2008 — Part 2: Round die plates
JB/T 8746.3-1998 — Rectangular die bases
JB/T 8746.3-2008 — Part 3: Rectangular adapters
JB/T 8746.4-1998 — Round die bases
JB/T 8746.4-2008 — Part 4: Round adapters
JB/T 8746.5-1998 — Cover plates
JB/T 8746.5-2008 — Part 5: Calibration blocks
JB/T 8746.7-1998 — T-pins
JB/T 8746.7-2008 — Part 7: Locating parts
Other editions:
JB/T 8746.6-1998 (earlier edition)
Standards on related subjects:
GB/T 45677-2025 — Forming moulds of composite material for upper cover of new energy vehicle battery pack
GB/T 6110-2021 — Drawing dies—Carbide alloy drawing dies—Structural types and dimensions
JB/T 6057-1992 — Steels for moulding parts of plastic moulds and their heat treatment - Technical specifications
JB/T 8745-2025 — Plastic profile extrusion die - Technical Specifications
JB/T 8744-2008 — Plastics extrusion dies - Terminology
5 Classification and status
Chinese Standard Classification (CCS): J 46
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 8746.6
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8746.6-2008 | Components of plastics profile extrusion dies - Part 6: Die plates | current edition | Current |
| JB/T 8746.6-1998 | Components of plastics profile extrusion dies - Part 6: Die plates | previous edition | Superseded |
This page sells the current edition, JB/T 8746.6-2008. Earlier editions are listed for reference only.
How to Download JB/T 8746.6-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8746.7-2008 — Components of plastics profile extrusion dies - Part 7: Locating parts
JB/T 8746.5-1998 — Components of plastics profile extrusion dies - Cover plates
JB/T 8746.7-1998 — Components of plastics profile extrusion dies - T-pins
JB/T 8746.6-2008
$55.00