Valid

HG/T 4087-2009Anticorrosive plastic alloy composite pipes (English PDF)

塑料合金防腐蚀复合管

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4087-2009 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 5, 2009

Implementation date

July 1, 2009

Scope

HG/T 4087-2009 is the English-translated version of 塑料合金防腐蚀复合管.

HG/T 4087-2009 is the recommended Chinese chemical industry standard for anticorrosive plastic alloy composite pipe. It gives the definition of the pipe and its classification, then the requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.

The pipes in scope are made from PVC resin, chlorinated polyethylene and chlorinated polyvinyl chloride resin, and they are used to convey petroleum, natural gas and other fluid media.

Testing follows GB/T 1633-2000, GB/T 2576-2005, GB/T 2577-2005, GB/T 2918-1998, GB/T 3854-2005, GB/T 5351-2005 and QB/T 3801-1999. The Ministry of Industry and Information Technology placed it under classification G94, with ICS 71.120 and 83.140. Issued on 5 February 2009, it has applied since 1 July 2009.

Found what you need?

Document preview — HG/T 4087-2009

National Standard of the People's Republic of China

ICS
71.120

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4087-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 February 2009 and has been in force since 1 July 2009.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the recommended Chinese chemical industry standard for anticorrosive plastic alloy composite pipe. It gives the definition of the pipe and its classification, then the requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. The pipes in scope are made from PVC resin, chlorinated polyethylene and chlorinated polyvinyl chloride resin, and they are used to convey petroleum, natural gas and other fluid media. Testing follows GB/T 1633-2000, GB/T 2576-2005, GB/T 2577-2005, GB/T 2918-1998, GB/T 3854-2005, GB/T 5351-2005 and QB/T 3801-1999. The Ministry of Industry and Information Technology placed it under classification G94, with ICS 71.120 and 83.140.

HG/T 4087-2009 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 1633-2000 — Plastics - Thermoplastic materials - Determination of vicat softening temperature (VST)

GB/T 2576-2005 — Test method for insoluble matter content of resin used in fiber reinforced plastics

GB/T 2577-2005 — Test method for resin content of glass fiber reinforced plastics

GB/T 2918-1998 — Plastics. Standard atmospheres for conditioning and testing

GB/T 3854-2005 — Test method for hardness of reinforced plastics by means of Barcol impresser

GB/T 5351-2005 — Fiber-reinforced thermosetting plastic composites pipe -- Determination of short-time hydraulic failure pressure

QB/T 3801-1999

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment

GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing

HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting

HG/T 4088-2024 — Plastic lining equipment - General technical conditions

HG/T 4090-2022 — Plastic-lined equipment - Spark test method

HG/T 4089-2022 — Plastic-lined equipment - Hydrostatic test method

6 Classification and status

International classification (ICS): 71.120

Chinese Standard Classification (CCS): G 94

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4087-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4087-2009

$85.00