HG/T 4061.1-2008Magnetic stripes for magnetic cards - Part 1: Low coercivity magnetic stripes (English PDF)
磁卡用磁条 第1部分:低矫顽力磁条
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4061.1-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 23, 2008
Implementation date
October 1, 2008
Scope
HG/T 4061.1-2008 is the English-translated version of 磁卡用磁条 第1部分:低矫顽力磁条.
The first part of the magnetic stripe series, HG/T 4061.1-2008, is the Chinese chemical industry standard for the low coercivity magnetic stripe. It lays down the requirements for a stripe made with low coercivity material, the test methods, the inspection rules and the provisions on marking, labelling, packaging, storage and transport.
A low coercivity stripe can lose the data recorded on it if it meets a magnetic field, and no value of coercivity is fixed here; tests are run on a card carrying the stripe, with deviations settled between the parties.
Its field is stripes for identity cards, paper cards, passbooks and comparable uses. A non-equivalent adoption of ISO/IEC 7811-2:2001, it refers to GB/T 191, GB/T 2828.1, GB/T 6388, GB/T 18455 and HG/T 4061.4-2008. Issued on 23 April 2008, it has applied since 1 October 2008.
Found what you need?
Document preview — HG/T 4061.1-2008
National Standard of the People's Republic of China
- ICS
- 35.220.22
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4061.1-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 23 April 2008 and has been in force since 1 October 2008.
It is one of 2 parts of the HG/T 4061 series.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
The first part of the magnetic stripe series, HG/T 4061.1-2008, is the Chinese chemical industry standard for the low coercivity magnetic stripe. It lays down the requirements for a stripe made with low coercivity material, the test methods, the inspection rules and the provisions on marking, labelling, packaging, storage and transport. A low coercivity stripe can lose the data recorded on it if it meets a magnetic field, and no value of coercivity is fixed here; tests are run on a card carrying the stripe, with deviations settled between the parties. Its field is stripes for identity cards, paper cards, passbooks and comparable uses. A non-equivalent adoption of ISO/IEC 7811-2:2001, it refers to GB/T 191, GB/T 2828.1, GB/T 6388, GB/T 18455 and HG/T 4061.4-2008.
HG/T 4061.1-2008 falls under ICS 35.220.22, in the field of information technology.
This catalogue holds 10 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191
GB/T 2828.1
GB/T 6388
GB/T 18455-2001
HG/T 4061.4-2008
4 Where this standard sits
It cites 5 standards, listed in full above.
One other standard in this catalogue cites it: HG/T 4061.2-2008.
It is one part of the HG/T 4061 series, of which this catalogue holds 2 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
HG/T 4061.2-2008 — Part 2: High coercivity magnetic stripes
Standards on related subjects:
GB/T 40260-2021 — Test method for determining gas permeability of polymer membrane materials
GB 38508-2020 — Limits for volatile organic compounds content in cleaning agents
HG/T 3009-1999 — Photographic film and film base - Determination of thickness by mechanical scanning
HG/T 5672-2020 — Anti-counterfeiting magnetic powder
HG/T 4060-2008 — Magnetic recording paper
7 Classification and status
International classification (ICS): 35.220.22
Chinese Standard Classification (CCS): G 83
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 6388Transport package shipping mark
- GB/T 18455-2001Packaging recycling marking
HG/T 4061.4-2008
Similar standards
How to Download HG/T 4061.1-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
HG/T 4061.1-2008
$105.00