HG/T 4061.2-2008Magnetic stripes for magnetic cards - Part 2: High coercivity magnetic stripes (English PDF)
磁卡用磁条 第2部分:高矫顽力磁条
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4061.2-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 23, 2008
Implementation date
October 1, 2008
Scope
HG/T 4061.2-2008 is the English-translated version of 磁卡用磁条 第2部分:高矫顽力磁条.
HG/T 4061.2-2008 is the second part of the Chinese chemical industry standard on magnetic stripes for cards, and it deals with the high coercivity stripe. It specifies the requirements for a stripe made with high coercivity material, the test methods, the inspection rules and the marking, labelling, packaging, storage and transport.
High coercivity improves the stripe's resistance to accidental erasure, though no value for it is fixed here; tests are run on a card carrying the stripe, and any departure from them is agreed between the parties.
The part applies to stripes on identity cards, paper cards, passbooks and similar articles. A non-equivalent adoption of ISO/IEC 7811-6:2001, it is used with GB/T 191, GB/T 2828.1, GB/T 6388, GB 18455, HG/T 4061.1-2008 and HG/T 4061.4-2008. Issued on 23 April 2008, it has applied since 1 October 2008.
Found what you need?
Document preview — HG/T 4061.2-2008
National Standard of the People's Republic of China
- ICS
- 35.220.22
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4061.2-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 23 April 2008 and has been in force since 1 October 2008.
It is one of 2 parts of the HG/T 4061 series.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the second part of the Chinese chemical industry standard on magnetic stripes for cards, and it deals with the high coercivity stripe. It specifies the requirements for a stripe made with high coercivity material, the test methods, the inspection rules and the marking, labelling, packaging, storage and transport. High coercivity improves the stripe's resistance to accidental erasure, though no value for it is fixed here; tests are run on a card carrying the stripe, and any departure from them is agreed between the parties. The part applies to stripes on identity cards, paper cards, passbooks and similar articles. A non-equivalent adoption of ISO/IEC 7811-6:2001, it is used with GB/T 191, GB/T 2828.1, GB/T 6388, GB 18455, HG/T 4061.1-2008 and HG/T 4061.4-2008.
HG/T 4061.2-2008 falls under ICS 35.220.22, in the field of information technology.
This catalogue holds 10 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191
GB/T 2828.1
GB/T 6388
GB 18455-2001 — Packaging recycle mark
HG/T 4061.1-2008 — Magnetic stripes for magnetic cards - Part 1: Low coercivity magnetic stripes
HG/T 4061.4-2008
4 Where this standard sits
It cites 6 standards, among them GB 18455-2001, HG/T 4061.1-2008, listed in full above.
It is one part of the HG/T 4061 series, of which this catalogue holds 2 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
HG/T 4061.1-2008 — Part 1: Low coercivity magnetic stripes
Standards on related subjects:
GB/T 40260-2021 — Test method for determining gas permeability of polymer membrane materials
GB 38508-2020 — Limits for volatile organic compounds content in cleaning agents
HG/T 3009-1999 — Photographic film and film base - Determination of thickness by mechanical scanning
HG/T 5672-2020 — Anti-counterfeiting magnetic powder
HG/T 4060-2008 — Magnetic recording paper
7 Classification and status
International classification (ICS): 35.220.22
Chinese Standard Classification (CCS): G 83
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 6388Transport package shipping mark
- GB 18455-2001Packaging recycle mark
- HG/T 4061.1-2008Magnetic stripes for magnetic cards - Part 1: Low coercivity magnetic stripes
HG/T 4061.4-2008
Similar standards
How to Download HG/T 4061.2-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG/T 4061.2-2008
$105.00