Valid

HG/T 3985-2007Polytetrafluoroethylene bellows expansion joints (English PDF)

聚四氟乙烯波纹管膨胀节

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3985-2007 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

September 22, 2007

Implementation date

April 1, 2008

Scope

HG/T 3985-2007 is the English-translated version of 聚四氟乙烯波纹管膨胀节.

HG/T 3985-2007 is the Chinese standard "Polytetrafluoroethylene bellows expansion joints".

Its scope clause reads: This Standard specifies terms and definitions, classification and designation, requirements, test methods, rest rules, marking, labeling, packaging, transportation and storage of polytetrafluoroethylene bellows compensators (hereafter referred to as compensators).

This Standard is applicable to the compensators using polytetrafluoroethylene as the overflowing position for the purpose of flexible compensation action for the pipelines, with nominal pressure PN not greater than 1.6 MPa, nominal dimension of DN25 mm~1000 mm, and operating temperature of -50°C~180°C, under the media of various concentrations, e.g. sulfuric acid, hydrochloric acid, hydrofluoric acid, benzene, alkali, aqua regia, organic solvent, reductant, and strongly-corrosive gas and liquid.

This Standard is not applicable to the compensators under such media as fused alkali, sodium metal, potassium, chlorine trifluoride and gaseous fluorine. Its clauses include terms and definitions.

Found what you need?

Document preview — HG/T 3985-2007

National Standard of the People's Republic of China

ICS
71.120

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions

1 Scope

This Standard specifies terms and definitions, classification and designation, requirements, test methods, rest rules, marking, labeling, packaging, transportation and storage of polytetrafluoroethylene bellows compensators (hereafter referred to as compensators).

This Standard is applicable to the compensators using polytetrafluoroethylene as the overflowing position for the purpose of flexible compensation action for the pipelines, with nominal pressure PN not greater than 1.6 MPa, nominal dimension of DN25 mm~1000 mm, and operating temperature of -50°C~180°C, under the media of various concentrations, e.g. sulfuric acid, hydrochloric acid, hydrofluoric acid, benzene, alkali, aqua regia, organic solvent, reductant, and strongly-corrosive gas and liquid.

This Standard is not applicable to the compensators under such media as fused alkali, sodium metal, potassium, chlorine trifluoride and gaseous fluorine.

2 Normative References

The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.

GB 191 Packaging-Pictorial Marking for Handling of Goods

GB/T 1047-2005 Pipework Components-Definition and Selection of DN (nominal size)

GB/T 1048-2005 Pipework Components-Definition and Selection of PN GB/T 1804-2000 General Tolerances-Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications

GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributea-Part1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection

GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Applicable to Inspection of Stability for Productive Process)

GB/T 4240 Stainless Steel Wires

GB/T 6388 Transport Package Shipping Mark

GB/T 8923-1988 Rust Grades and Preparation Grades of Steel Surfaces before Application of Paints and Related Products

GB/T 9122-2000 Loose Plate Steel Pipe Flanges with Lapped Pipe End and Pressed Collar with Long Neck

GB/T 9124-2000 Specification for Steel Pipe Flanges

GB/T 10111 Methods for Random Sampling by Utilizing Dices of Random Number

GB/T 12777-1999 General Specification for Metal Bellows Expansion Joints

GB/T 13384 General Specifications for Packing of Mechanical and Electrical Product

GB/T 14436 General Principles of Industrial Product Guarantee Documents

HG/T 2902 Polytetrafluoroethylene Molding Powder

3 Terms and Definitions

For the purposes of this Standard, the terms established in GB/T 12777-1999 apply.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 3985-2007

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3985-2007

$85.00