HG/T 3954-2007Rubber rollers for metallurgy (English PDF)
冶金胶辊
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3954-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 20, 2007
Implementation date
January 1, 2008
Scope
HG/T 3954-2007 is the English-translated version of 冶金胶辊.
HG/T 3954-2007 is the Chinese chemical industry standard for rubber rollers used in metallurgy. It sets out how the products are classified and marked, describes their structure, and gives the requirements, test methods and inspection rules together with the provisions for marking, packaging, transport and storage.
It applies to the driving and tension rollers, squeeze rollers and immersion rollers used on strip metal production lines for stainless steel, galvanized and tinned products and for non-ferrous metals, and rollers of other kinds may follow it by reference.
Classified G47 with the international group 83.140.99, it is used with GB/T 528-1998, GB/T 529-1999, GB/T 531-1999, GB/T 1681-1991, GB/T 3512-2001, GB/T 9239, HG/T 2413.1-1992, HG/T 2450-1999 and HG/T 3078-2001. Issued on 20 July 2007, it has applied since 1 January 2008.
Found what you need?
Document preview — HG/T 3954-2007
National Standard of the People's Republic of China
- ICS
- 83.140.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 3954-2007 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 July 2007.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for rubber rollers used in metallurgy. It sets out how the products are classified and marked, describes their structure, and gives the requirements, test methods and inspection rules together with the provisions for marking, packaging, transport and storage. It applies to the driving and tension rollers, squeeze rollers and immersion rollers used on strip metal production lines for stainless steel, galvanized and tinned products and for non-ferrous metals, and rollers of other kinds may follow it by reference. Classified G47 with the international group 83.140.99, it is used with GB/T 528-1998, GB/T 529-1999, GB/T 531-1999, GB/T 1681-1991, GB/T 3512-2001, GB/T 9239, HG/T 2413.1-1992, HG/T 2450-1999 and HG/T 3078-2001.
HG/T 3954-2007 falls under ICS 83.140.99, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528-1998 — Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties [including MODIFICATION 1]
GB/T 529-1999 — Rubber, vulcanized or thermoplastic--Determination of tear strength (Trouser, angle and crescent test pieces)
GB/T 531-1999 — Rubber--Determination of indentation hardness by means of pocket hardness meters
GB/T 1681-1991 — Rubber--Determination of rebound resilience of vulcanizates
GB/T 1689-1998 — Rubber vulcanized--Determination of abrasion resistance (Akron machine)
GB/T 1690-1992 — Rubber, vulcanized-Determination of the effect of liquids
GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method
GB/T 4459.5
GB/T 9239
GB/T 11211-1989 — Rubber vulcanized--Determination of adhesion to metal--Tension method
HG/T 2413.1-1992 — Rubber-covered Rollers - Determination of Apparent Hardness: Jones (P.J) Hardness Tester Method
HG/T 2413.2-1992 — Rubber-covered Rollers - Determination of Apparent Hardness: Shore Hardness Tester Method
HG/T 2450-1999 — Rubber. covered rollers. Determination of apparent hardness: IRHD method
HG/T 3077
HG/T 3078-2001 — Rubber- or plastics-covered rollers - Surface characteristics
HG/T 3079
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 14833-2020 — Synthetic materials sports field surfaces
HG/T 4070-2008 — Silicone rubber sheets
GB/T 5574-2008 — Industrial rubber sheet
HG/T 6323-2024 — Two-piece can coloring rubber rollers
HG/T 2821.1-2023 — Dipped polyester cords for V-belts and V-ribbed belts - Part 1: Stiff cords
HG/T 2793-2023 — Conductive and antistatic rubber sheets for industrial use
6 Classification and status
International classification (ICS): 83.140.99
Chinese Standard Classification (CCS): G 47
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528-1998Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 529-1999Rubber, vulcanized or thermoplastic -- Determination of tear strength (Trouser, angle and crescent test pieces)
- GB/T 531-1999Rubber--Determination of indentation hardness by means of pocket hardness meters
- GB/T 1681-1991Rubber -- Determination of rebound resilience of vulcanizates
- GB/T 1689-1998Rubber vulcanized-Determination of abrasion resistance (Akron machine)
- GB/T 1690-1992Rubber, vulcanized or thermoplastic—Determination of the effect of liquids
Similar standards
How to Download HG/T 3954-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11211-1989 — Rubber vulcanized--Determination of adhesion to metal--Tension method
GB/T 1681-1991 — Rubber--Determination of rebound resilience of vulcanizates
GB/T 1689-1998 — Rubber vulcanized--Determination of abrasion resistance (Akron machine)
HG/T 3954-2007
$135.00