HG/T 3838-2008Rubber - Determination of free sulfur content - Potentiometric titration method (English PDF)
橡胶 游离硫含量的测定 电位滴定法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3838-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 23, 2008
Implementation date
October 1, 2008
Scope
HG/T 3838-2008 is the English-translated version of 橡胶 游离硫含量的测定 电位滴定法.
The free sulphur content of rubber is what HG/T 3838-2008 measures, by potentiometric titration. This recommended Chinese chemical industry standard specifies the titration procedure and the way the result is calculated and reported.
It applies to raw rubber, both natural and synthetic, and to rubber compounds and vulcanizates whose free sulphur content is to be determined. The standard quotes GB/T 601, GB/T 3516 and GB/T 17783, which are applied with it.
It carries the classification G40 and the international classification 83.060, and it replaces HG/T 3838-2006. Issued on 23 April 2008, it has applied since 1 October 2008.
Found what you need?
Document preview — HG/T 3838-2008
National Standard of the People's Republic of China
- ICS
- 83.060
- Replacing
- HG/T 3838-2006
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 3838-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 23 April 2008 and has been in force since 1 October 2008.
It replaces the earlier edition HG/T 3838-2006.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
The free sulphur content of rubber is what HG/T 3838-2008 measures, by potentiometric titration. This recommended Chinese chemical industry standard specifies the titration procedure and the way the result is calculated and reported. It applies to raw rubber, both natural and synthetic, and to rubber compounds and vulcanizates whose free sulphur content is to be determined. The standard quotes GB/T 601, GB/T 3516 and GB/T 17783, which are applied with it. It carries the classification G40 and the international classification 83.060, and it replaces HG/T 3838-2006.
HG/T 3838-2008 falls under ICS 83.060, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 601
GB/T 3516
GB/T 17783
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 3838-2006 (earlier edition)
Standards on related subjects:
GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
GB/T 3511-2018 — Rubber, vulcanized or thermoplastic -- Resistance to weathering
GB/T 3512-2014 — Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests -- Air-oven method
HG/T 3843-2008 — Vulcanized rubber - Test method for short-time static compression
HG/T 3837-2008 — Rubber - Determination of total hydrocarbon content - Pyrolysis method
HG/T 3836-2008 — Vulcanized rubber - Test method for sliding abrasion
6 Classification and status
International classification (ICS): 83.060
Chinese Standard Classification (CCS): G 40
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 3838
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3838-2008 | Rubber - Determination of free sulfur content - Potentiometric titration method | current edition | Current |
| HG/T 3838-2006 | Rubber - Determination of free sulfur content - Potentiometric titration method | previous edition | Superseded |
This page sells the current edition, HG/T 3838-2008. Earlier editions are listed for reference only.
How to Download HG/T 3838-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17783-1999 — Rubber, vulcanized. Preparation of samples and test pieces. Chemical tests
GB/T 17783-2019 — Rubber, vulcanized or thermoplastic - Chemical tests - Preparation of samples and test piece
GB/T 3516-1994 — Rubber--Determination of solvent extract
HG/T 3838-2008
$85.00