HG/T 3697-2016Hot-melt adhesives for textiles (English PDF)
纺织品用热熔胶粘剂
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3697-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 15, 2016
Implementation date
July 1, 2016
Scope
HG/T 3697-2016 is the English-translated version of 纺织品用热熔胶粘剂.
HG/T 3697-2016 is the Chinese chemical industry standard, recommended in status, that covers hot-melt adhesives used on textiles.
It gives the terms and definitions for these adhesives, their product classification and marking, the technical requirements, the test methods, the inspection rules and the provisions for packaging, marking, transport and storage.
Its field is textile hot-melt adhesives based on copolyamide, copolyester, polyethylene of both high and low density, ethylene-vinyl acetate copolymer and thermoplastic polyurethane.
It is carried out with GB/T 1033.1-2008, GB/T 1636-2008, GB/T 2916-2007, GB/T 3682-2000, GB/T 9345.1-2008 and GB/T 16582-2008 among the standards it quotes. The 2002 edition, HG/T 3697-2002, is withdrawn by it. Issued on 15 January 2016, it has applied since 1 July 2016.
Found what you need?
Document preview — HG/T 3697-2016
National Standard of the People's Republic of China
- ICS
- 83.180
- Replacing
- HG/T 3697-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 3697-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 January 2016 and has been in force since 1 July 2016.
It replaces the earlier edition HG/T 3697-2002.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese chemical industry standard, recommended in status, that covers hot-melt adhesives used on textiles. It gives the terms and definitions for these adhesives, their product classification and marking, the technical requirements, the test methods, the inspection rules and the provisions for packaging, marking, transport and storage. Its field is textile hot-melt adhesives based on copolyamide, copolyester, polyethylene of both high and low density, ethylene-vinyl acetate copolymer and thermoplastic polyurethane. It is carried out with GB/T 1033.1-2008, GB/T 1636-2008, GB/T 2916-2007, GB/T 3682-2000, GB/T 9345.1-2008 and GB/T 16582-2008 among the standards it quotes. The 2002 edition, HG/T 3697-2002, is withdrawn by it.
HG/T 3697-2016 falls under ICS 83.180, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1033.1-2008 — Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
GB/T 1636-2008 — Plastics -- Determination of apparent density material that can be poured from a specified funnel
GB/T 2916-2007 — Plastic -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis using air-jet sieve apparatus
GB/T 2918-1998 — Plastics. Standard atmospheres for conditioning and testing
GB/T 2943
GB/T 3682-2000 — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
GB/T 6283-2008 — Chemical products -- Determination of water Karl-Fischer method (general method)
GB/T 6284-2006 — Chemical products for industrial use - General method for determination of water content - The loss of mass on drying method
GB/T 6678-2003 — General principles for sampling chemical products
GB/T 6679-2003 — General rules for sampling solid chemical products
GB/T 9345.1-2008 — Plastics - Determination of ash - Part 1: Generalmethods
GB/T 9345.4-2008 — Plastics -- Determination of ash -- Part 4: Polyamides
GB/T 12006.2-2009 — Plastic polyamide -- Part 2: Determination of moisture
GB/T 16582-2008 — Plastics -- Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
GB/T 19466.3-2004 — Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
FZ/T 01
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 3697-2002 (earlier edition)
Standards on related subjects:
GB/T 14732-2017 — Wood adhesives: urea-formaldehyde, phenol-formaldehyde and melamine-formaldehyde resins
GB/T 33320-2016 — Adhesives in food packaging materials and containers
HG/T 3698-2002 — EVA hot-melt adhesives
HG/T 6404-2025 — Adhesives for furniture
HG/T 4223-2025 — Adhesives for wooden floor laying
HG/T 3948-2025 — Hot-melt adhesives for sanitary products
6 Classification and status
International classification (ICS): 83.180
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1033.1-2008Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
- GB/T 1636-2008Plastics -- Determination of apparent density material that can be poured from a specified funnel
- GB/T 2916-2007Plastic -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis using air-jet sieve apparatus
- GB/T 2918-1998Plastics -- Standard atmospheres for conditioning and testing
- GB/T 2943Terms of adhesives
- GB/T 3682-2000Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
FZ/T 01
Similar standards
Editions of HG/T 3697
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3697-2016 | Hot-melt adhesives for textiles | current edition | Current |
| HG/T 3697-2002 | Hot-melt adhesives for textiles | previous edition | Superseded |
This page sells the current edition, HG/T 3697-2016. Earlier editions are listed for reference only.
How to Download HG/T 3697-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1033.1-2008 — Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
GB/T 12006.2-2009 — Plastic polyamide -- Part 2: Determination of moisture
GB/T 1636-2008 — Plastics -- Determination of apparent density material that can be poured from a specified funnel
HG/T 3697-2016
$165.00