HG/T 3666-2000Rubber tubing and hoses for fuel systems of internal combustion engines using oxidized fuels (English PDF)
内燃机燃油系统输送氧化燃油用纯胶管和橡胶软管
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3666-2000 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 23, 2000
Implementation date
December 1, 2000
Scope
HG/T 3666-2000 is the English-translated version of 内燃机燃油系统输送氧化燃油用纯胶管和橡胶软管.
HG/T 3666-2000 is the recommended Chinese chemical industry standard for rubber tubing and hoses used in the fuel circuits of internal combustion engines running on oxidized fuels, an identical adoption of ISO 4639-3:1995.
It states the requirements for tubing and hose carrying fuel that has been oxidized or acidified, fuel that may also contain compounds such as ethanol.
Such hoses are intended for injection systems in which fuel circulates repeatedly, and they can suit storage systems at high ambient temperature; they are usually built from a speciality elastomer with an inner lining.
Equipment for metering liquid fuel falls outside the standard, as do hoses fully immersed in the tank. It is applied with GB/T 528, GB/T 1690, GB/T 3512, GB/T 5563 to GB/T 5567 and ISO 8308. Issued on 23 May 2000, it has applied since 1 December 2000.
Found what you need?
Document preview — HG/T 3666-2000
National Standard of the People's Republic of China
- ICS
- 23.040.70
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3666-2000 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 23 May 2000 and has been in force since 1 December 2000.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 16 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for rubber tubing and hoses used in the fuel circuits of internal combustion engines running on oxidized fuels, an identical adoption of ISO 4639-3:1995. It states the requirements for tubing and hose carrying fuel that has been oxidized or acidified, fuel that may also contain compounds such as ethanol. Such hoses are intended for injection systems in which fuel circulates repeatedly, and they can suit storage systems at high ambient temperature; they are usually built from a speciality elastomer with an inner lining. Equipment for metering liquid fuel falls outside the standard, as do hoses fully immersed in the tank.
HG/T 3666-2000 falls under ICS 23.040.70, in the field of fluid systems and general-purpose components.
This catalogue holds 16 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528-1992 — Rubber, vulcanized and thermoplastic - Determinnation of tensile properties
GB/T 1690-1992 — Rubber, vulcanized-Determination of the effect of liquids
GB/T 1800.2-1998 — Limits and fits--Bases--Part 2: Basic rules of tolerances, deviations and fits
GB/T 2941-1991 — Rubber-Standard temperatures, humidities and times for the conditioning environmental and testing of test pieces
GB/T 3512-1983 (1989)
GB/T 3672-1992
GB/T 5563 - 1994 — Rubber and plastics hoses and hose assemblies--Hydrostatic testing
GB/T 5564-1994 — Rubber and plastics hoses--Subambient temperature flexibility tests
GB/T 5565-1994 — Rubber or plastics hoses and tubing--Bending tests
GB/T 5567-1994 — Rubber and plastics hoses and hose assemblies--Determination of suction resistance
GB/T 6031-1998 — Rubber, Vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100IRHD)
GB/T 7759-1996 — Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures
GB/T 9573-1988 — Rubber and plastics hoses and hose asssemblies--Methods of measurement of dimensions
GB/T 12833-1991 — Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
GB/T 14905-1994 — Rubber and plastics hose and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing
HG/T 2869-1997 — Rubber and plastics hoses-Assessment of ozone resistance under static conditions
ISO 8308-1993
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 16 pages
5 Related standards
Standards on related subjects:
GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method
GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
HG/T 2014-2025 — Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects
HG/T 3047-2024 — Determination of air permeability of rubber or plastic coated fabrics
HG/T 2490-2023 — Rubber hoses and hose assemblies, wire or textile reinforced, for dredging - Specification
6 Classification and status
International classification (ICS): 23.040.70
Chinese Standard Classification (CCS): G 42
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528-1992Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 1690-1992Rubber, vulcanized or thermoplastic—Determination of the effect of liquids
- GB/T 1800.2-1998Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
- GB/T 2941-1991Rubber - General procedures for preparing and conditioning test pieces for physical test methods
- GB/T 3512-1983 (1989)Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests in hot air
- GB/T 5563 - 1994Rubber and plastics hoses and hose assemblies - Hydrostatic testing
GB/T 3672-1992 · ISO 8308-1993
Similar standards
How to Download HG/T 3666-2000
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12833-1991 — Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
GB/T 14905-1994 — Rubber and plastics hose and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing
GB/T 1690-1992 — Rubber, vulcanized-Determination of the effect of liquids
HG/T 3666-2000
$285.00