Valid

HG/T 3665-2000Rubber tubing and hoses for fuel systems of internal combustion engines using oxygenated fuels (English PDF)

内燃机燃油系统输送含氧燃油用纯胶管和橡胶软管

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3665-2000 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 23, 2000

Implementation date

December 1, 2000

Scope

HG/T 3665-2000 is the English-translated version of 内燃机燃油系统输送含氧燃油用纯胶管和橡胶软管.

HG/T 3665-2000 is the recommended Chinese chemical industry standard for rubber tubing and hoses in the fuel circuits of internal combustion engines running on oxygenated fuels, adopted identically from ISO 4639-2:1995.

It sets the requirements for tubing and hose carrying liquid fuel to which oxygenates such as ethanol have been added, and it leaves out equipment for metering liquid fuel.

It covers hoses used in carburettor systems where the fuel is not a pure oxygenate, and those hoses are expected to show moderate resistance to oxygenated, acidic fuel.

Its test work draws on GB/T 528, GB/T 1690, GB/T 2941, GB/T 3512, GB/T 5563, GB/T 5564, GB/T 5565, GB/T 5567, GB/T 6031 and GB/T 7759, with HG/T 2869 and ISO 8308 also cited. Issued on 23 May 2000, it has applied since 1 December 2000.

Found what you need?

Document preview — HG/T 3665-2000

National Standard of the People's Republic of China

ICS
23.040.70

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3665-2000 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 23 May 2000 and has been in force since 1 December 2000.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the recommended Chinese chemical industry standard for rubber tubing and hoses in the fuel circuits of internal combustion engines running on oxygenated fuels, adopted identically from ISO 4639-2:1995. It sets the requirements for tubing and hose carrying liquid fuel to which oxygenates such as ethanol have been added, and it leaves out equipment for metering liquid fuel. It covers hoses used in carburettor systems where the fuel is not a pure oxygenate, and those hoses are expected to show moderate resistance to oxygenated, acidic fuel. Its test work draws on GB/T 528, GB/T 1690, GB/T 2941, GB/T 3512, GB/T 5563, GB/T 5564, GB/T 5565, GB/T 5567, GB/T 6031 and GB/T 7759, with HG/T 2869 and ISO 8308 also cited.

HG/T 3665-2000 falls under ICS 23.040.70, in the field of fluid systems and general-purpose components.

This catalogue holds 16 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 528-1998 — Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties [including MODIFICATION 1]

GB/T 1690-1992 — Rubber, vulcanized-Determination of the effect of liquids

GB/T 1800.2-1998 — Limits and fits--Bases--Part 2: Basic rules of tolerances, deviations and fits

GB/T 2941-1991 — Rubber-Standard temperatures, humidities and times for the conditioning environmental and testing of test pieces

GB/T 3512-1983 (1989)

GB/T 3672-1992

GB/T 5563 - 1994 — Rubber and plastics hoses and hose assemblies--Hydrostatic testing

GB/T 5564-1994 — Rubber and plastics hoses--Subambient temperature flexibility tests

GB/T 5565-1994 — Rubber or plastics hoses and tubing--Bending tests

GB/T 5567-1994 — Rubber and plastics hoses and hose assemblies--Determination of suction resistance

GB/T 6031-1998 — Rubber, Vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100IRHD)

GB/T 7759-1996 — Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures

GB/T 9573-1988 — Rubber and plastics hoses and hose asssemblies--Methods of measurement of dimensions

GB/T 12833-1991 — Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

GB/T 14905-1994 — Rubber and plastics hose and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing

HG/T 2869-1997 — Rubber and plastics hoses-Assessment of ozone resistance under static conditions

ISO 8308-1993

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification

GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method

GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes

HG/T 2014-2025 — Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects

HG/T 3047-2024 — Determination of air permeability of rubber or plastic coated fabrics

HG/T 2490-2023 — Rubber hoses and hose assemblies, wire or textile reinforced, for dredging - Specification

6 Classification and status

International classification (ICS): 23.040.70

Chinese Standard Classification (CCS): G 42

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 3672-1992 · ISO 8308-1993

Similar standards

How to Download HG/T 3665-2000

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3665-2000

$265.00