HG/T 3112-2011Floating head shell-and-tube graphite heat exchangers (English PDF)
浮头列管式石墨换热器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3112-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 3112-2011 is the English-translated version of 浮头列管式石墨换热器.
HG/T 3112-2011 is the Chinese chemical industry standard for floating head shell-and-tube graphite heat exchangers. It classifies these exchangers and lays down their requirements, test methods, inspection rules and the provisions for marking, packaging, transport and storage.
It applies to floating head tubular graphite heat exchangers built from impervious graphite tubes and impervious graphite material bonded with graphite phenolic adhesive.
Design and manufacture are tied to GB 150-1998, HG/T 2059-2004, HG/T 2370-2005, HG/T 20592-2009, JB/T 4700-2000 and JB/T 4735-1997. The standard replaces the 1998 edition, HG/T 3112-1998. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 3112-2011
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 3112-1998
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3112-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 3112-1998.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese chemical industry standard for floating head shell-and-tube graphite heat exchangers. It classifies these exchangers and lays down their requirements, test methods, inspection rules and the provisions for marking, packaging, transport and storage. It applies to floating head tubular graphite heat exchangers built from impervious graphite tubes and impervious graphite material bonded with graphite phenolic adhesive. Design and manufacture are tied to GB 150-1998, HG/T 2059-2004, HG/T 2370-2005, HG/T 20592-2009, JB/T 4700-2000 and JB/T 4735-1997. The standard replaces the 1998 edition, HG/T 3112-1998.
HG/T 3112-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 2059-2004 — Technical regulations for imperious graphite tube
HG/T 2370-2005 — Specification of graphite chemical process equipment
HG/T 20592-2009 — Steel Pipe Flanges
JB/T 4700-2000 — Pressure vessel flanges - Classification and technical requirements
JB/T 4735-1997 — Steel welded atmospheric pressure vessels
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 3112-2025 (later edition)
HG/T 3112-1998 (earlier edition)
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 3105-2009 — Vitreous and porcelain enamels for sheet steel. Production of specimens for testing
HG/T 2056-2026 — Laminated glass-lined steel condenser
HG/T 3113-2019 — Circular-block impervious graphite heat exchangers
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 94
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150-1998Pressure Vessels (Collection GB150.1~150.4-2011)
- HG/T 2059-2004Technical specification for imperious graphite tube
- HG/T 2370-2005Technical specifications for chemical equipment made of impervious graphite
- HG/T 20592-2009Steel Pipe Flanges
- JB/T 4700-2000Pressure vessel flanges - Classification and technical requirements
- JB/T 4735-1997Steel welded atmospheric pressure vessels
Similar standards
Editions of HG/T 3112
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3112-2011 | Floating head shell-and-tube graphite heat exchangers | current edition | Current |
| HG/T 3112-1998 | Floating head shell-and-tube graphite heat exchangers | previous edition | Superseded |
This page sells the current edition, HG/T 3112-2011. Earlier editions are listed for reference only.
How to Download HG/T 3112-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 2059-2004 — Technical regulations for imperious graphite tube
HG/T 20592-2009 — Steel Pipe Flanges
HG/T 3112-2011
$370.00