HG/T 2947-2011Rubber gaskets for aluminium canteens (English PDF)
铝背水壶橡胶密封垫片
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2947-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 2947-2011 is the English-translated version of 铝背水壶橡胶密封垫片.
HG/T 2947-2011 is the recommended Chinese chemical industry standard for rubber gaskets used in aluminium canteens. It sets out the technical requirements for these gaskets together with the test methods, the inspection rules and the provisions on marking, packaging, transport and storage.
The document covers gaskets made with rubber as the main raw material, fitted to aluminium canteens and to canteens made of other materials. Its testing clauses draw on the general rubber methods GB/T 528-2009, GB/T 531.1-2008 and GB/T 3512-2001, on GB/T 2941 and GB/T 2828.1-2003, and on GB/T 24153-2009, GB 4806.1 and HG/T 2198.
It replaces HG/T 2947-1986. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 2947-2011
National Standard of the People's Republic of China
- ICS
- 83.140.99
- Replacing
- HG 2947-1986
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 2947-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 2947-1986.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for rubber gaskets used in aluminium canteens. It sets out the technical requirements for these gaskets together with the test methods, the inspection rules and the provisions on marking, packaging, transport and storage. The document covers gaskets made with rubber as the main raw material, fitted to aluminium canteens and to canteens made of other materials. Its testing clauses draw on the general rubber methods GB/T 528-2009, GB/T 531.1-2008 and GB/T 3512-2001, on GB/T 2941 and GB/T 2828.1-2003, and on GB/T 24153-2009, GB 4806.1 and HG/T 2198. It replaces HG/T 2947-1986.
HG/T 2947-2011 falls under ICS 83.140.99, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
GB/T 531.1-2008 — Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
GB/T 2941
GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method
GB 4806.1
GB/T 24153-2009 — Rubber and elastomer materials - Determination of N-nitrosamines
HG/T 2198
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2947-1986 (earlier edition)
Standards on related subjects:
GB/T 7543-2020 — Single-use sterile rubber surgical gloves
HG/T 2584-2010 — Rubber industrial gloves
YY/T 0031-2008 — Silicone tubes and elastomeric parts for infusion and transfusion
HG/T 2946-2011 — Rubber nipples
HG/T 2945-2011 — Rubber sealing rings for food containers
HG/T 2944-2011 — Rubber gaskets for food containers
6 Classification and status
International classification (ICS): 83.140.99
Chinese Standard Classification (CCS): G 45
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528-2009Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 531.1-2008Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 2828.1-2003Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2941Rubber - General procedures for preparing and conditioning test pieces for physical test methods
- GB/T 3512-2001Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests in hot air
- GB 4806.1National food safety standard - General safety requirements on food contact materials and articles
Similar standards
Editions of HG/T 2947
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2947-2011 | Rubber gaskets for aluminium canteens | current edition | Current |
| HG 2947-1986 | Rubber gaskets for aluminium canteens | previous edition | Superseded |
This page sells the current edition, HG/T 2947-2011. Earlier editions are listed for reference only.
How to Download HG/T 2947-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4806.1-1994 — Hygienic standard for foodstuff rubber products
GB 4806.1-2016 — National food safety standard - General safety requirements on food contact materials and articles
GB/T 24153-2009 — Rubber and elastomer materials - Determination of N-nitrosamines
HG/T 2947-2011
$145.00