HG/T 2866-2016Rubber fenders (English PDF)
橡胶护舷
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2866-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 15, 2016
Implementation date
July 1, 2016
Scope
HG/T 2866-2016 is the English-translated version of 橡胶护舷.
HG/T 2866-2016 is the recommended Chinese chemical industry standard for rubber fenders, the hollow rubber bodies that protect quays and vessels. It gives the classification and designation of fenders and then their requirements, test methods and inspection rules, followed by marking, packaging, transport and storage.
Its subject is the compressive hollow rubber fender, which absorbs the impact of a berthing ship by changing shape; an appendix carries the requirements for a further fender type.
The mechanical and ageing checks are run to GB/T 528, GB/T 531.1, GB/T 3512, GB/T 7759, GB/T 7760 and GB/T 7762. The standard replaces HG/T 2866-2003. Issued on 15 January 2016, it has applied since 1 July 2016.
Found what you need?
Document preview — HG/T 2866-2016
National Standard of the People's Republic of China
- ICS
- 83.140.99
- Replacing
- HG/T 2866-2003
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 2866-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 January 2016 and has been in force since 1 July 2016.
It replaces the earlier edition HG/T 2866-2003, HG/T 2866-1997.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for rubber fenders, the hollow rubber bodies that protect quays and vessels. It gives the classification and designation of fenders and then their requirements, test methods and inspection rules, followed by marking, packaging, transport and storage. Its subject is the compressive hollow rubber fender, which absorbs the impact of a berthing ship by changing shape; an appendix carries the requirements for a further fender type. The mechanical and ageing checks are run to GB/T 528, GB/T 531.1, GB/T 3512, GB/T 7759, GB/T 7760 and GB/T 7762. The standard replaces HG/T 2866-2003.
HG/T 2866-2016 falls under ICS 83.140.99, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528
GB/T 531.1
GB/T 3512
GB/T 7759
GB/T 7760
GB/T 7762
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2866-2003 (earlier edition)
HG/T 2866-1997 (earlier edition)
Standards on related subjects:
GB/T 14833-2020 — Synthetic materials sports field surfaces
HG/T 4070-2008 — Silicone rubber sheets
GB/T 5574-2008 — Industrial rubber sheet
HG/T 6323-2024 — Two-piece can coloring rubber rollers
HG/T 2821.1-2023 — Dipped polyester cords for V-belts and V-ribbed belts - Part 1: Stiff cords
HG/T 2793-2023 — Conductive and antistatic rubber sheets for industrial use
6 Classification and status
International classification (ICS): 83.140.99
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 531.1Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 3512Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests in hot air
- GB/T 7759Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures
- GB/T 7760Rubber, vulcanized or thermoplastic -- Determination of adhesion to a rigid substrate-90 degrees peel method
- GB/T 7762Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Static strain test
Similar standards
Editions of HG/T 2866
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2866-2016 | Rubber fenders | current edition | Current |
| HG/T 2866-2003 | Rubber fenders | previous edition | Superseded |
This page sells the current edition, HG/T 2866-2016. Earlier editions are listed for reference only.
How to Download HG/T 2866-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3512-1983 — Rubber, vulcanized--Accelerated ageing or heat-resistance test--Air-oven method
GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method
GB/T 3512-2014 — Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests -- Air-oven method
HG/T 2866-2016
$360.00