HG/T 2733-2011Free-float ball type automatic liquid dischargers (English PDF)
自由浮球式自动排液器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2733-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 2733-2011 is the English-translated version of 自由浮球式自动排液器.
HG/T 2733-2011 is the chemical industry standard for free-float ball type automatic liquid dischargers. It covers the design of these devices and their test methods, together with manufacture, inspection rules, marking, packaging and storage requirements.
The dischargers it applies to are those that remove accumulated condensate and water from gas and steam service, with nominal pressure PN from 0.1 MPa to 6.4 MPa, nominal diameter DN from 10 mm to 100 mm and medium temperature from 0 °C to 450 °C. A long list of references is quoted, among them GB 150, GB/T 231.1, GB/T 699, GB/T 1220, GB/T 6414, GB/T 13306, JB/T 75 and QB/T 4041.
It supersedes HG/T 2733-1995. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 2733-2011
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 2733-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2733-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 2733-1995.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the chemical industry standard for free-float ball type automatic liquid dischargers. It covers the design of these devices and their test methods, together with manufacture, inspection rules, marking, packaging and storage requirements. The dischargers it applies to are those that remove accumulated condensate and water from gas and steam service, with nominal pressure PN from 0.1 MPa to 6.4 MPa, nominal diameter DN from 10 mm to 100 mm and medium temperature from 0 °C to 450 °C. A long list of references is quoted, among them GB 150, GB/T 231.1, GB/T 699, GB/T 1220, GB/T 6414, GB/T 13306, JB/T 75 and QB/T 4041. It supersedes HG/T 2733-1995.
HG/T 2733-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150
GB/T 231.1
GB/T 699
GB/T 1031
GB/T 1184
GB/T 1220
GB/T 3985
GB/T 4879
GB/T 5574
GB/T 6414
GB/T 12228
GB/T 12229
GB/T 13306
GB/T 13384
JB/T 75
QB/T 3625
QB/T 4041
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2733-1995 (earlier edition)
Standards on related subjects:
GB/T 29465-2023 — Flange of floating heat exchangers
HG/T 2100-2020 — Mechanical seals for liquid ring chlorine pumps
HG/T 2099-2020 — Test code for mechanical seals of stirred vessels
HG/T 2044-2020 — Plasma-sprayed chromium oxide seal rings for mechanical seals - Technical specifications
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 91
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 231.1Metallic materials - Brinell hardness test - Part 1: Test method
- GB/T 699Quality carbon structure steels
- GB/T 1031Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1220Stainless steel bars
QB/T 3625
Similar standards
Editions of HG/T 2733
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2733-2011 | Free-float ball type automatic liquid dischargers | current edition | Current |
| HG/T 2733-1995 | Free-float ball type automatic liquid dischargers | previous edition | Superseded |
This page sells the current edition, HG/T 2733-2011. Earlier editions are listed for reference only.
How to Download HG/T 2733-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 2733-2011
$350.00