Valid

HG/T 2702-2016Inflatable packer rubber elements (English PDF)

扩张式封隔器胶筒

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2702-2016 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

January 15, 2016

Implementation date

July 1, 2016

Scope

HG/T 2702-2016 is the English-translated version of 扩张式封隔器胶筒.

HG/T 2702-2016 is the recommended chemical industry standard of China for the inflatable rubber elements of packers used in oil, gas and shale gas wells.

It gives the terms and definitions, the structure and the designation of these expansion packer elements, then their requirements, inspection rules and the provisions for marking, packaging, transport and storage.

It applies to the expansion packers and packer rubber cartridges used in oilfield zonal testing, water injection, acidizing and fracturing, in coalbed methane and shale gas test fracturing, and in well completion.

Its physical testing follows GB/T 528, GB/T 531.1, GB/T 1690, GB/T 3512, GB/T 7759 and GB/T 20739, and it is used with HG/T 2701-2016. It replaces HG/T 2702-1995. Issued on 15 January 2016, it has applied since 1 July 2016.

Found what you need?

Document preview — HG/T 2702-2016

National Standard of the People's Republic of China

ICS
83.140
Replacing
HG/T 2702-1995

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 3.1 Category A
  • 3.2 Category B
  • 4 Classification and designation
  • 4.1 General
  • 4.2 Character group 1
  • 4.3 Character group 2
  • 4.4 Character group 3
  • 4.5 Character group 4
  • 4.6 Designation example
  • 5 Test Methods
  • 5.1 Appearance requirements
  • 5.2 Technical requirements
  • 5.3 Environmental requirements
  • 6.1 Test conditions
  • 6.2 Test substrate
  • 6.3 Apparatus
  • 6.4 Appearance
  • 6.5 Coating property
  • 6.6 Shear elongation
  • 6.7 Tensile shear strength
  • 6.8 Tensile bond strength
  • 6.9 Free formaldehyde
  • 7 Inspection rules
  • 7.1 Inspection
  • 7.2 Batching
  • 7.3 Sampling
  • 7.4 Judgment of inspection results
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • 9 Packaging, transportation and storage

1 Foreword

HG/T 2702-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 January 2016 and has been in force since 1 July 2016.

It replaces the earlier edition HG/T 2702-1995.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the recommended chemical industry standard of China for the inflatable rubber elements of packers used in oil, gas and shale gas wells. It gives the terms and definitions, the structure and the designation of these expansion packer elements, then their requirements, inspection rules and the provisions for marking, packaging, transport and storage. It applies to the expansion packers and packer rubber cartridges used in oilfield zonal testing, water injection, acidizing and fracturing, in coalbed methane and shale gas test fracturing, and in well completion. Its physical testing follows GB/T 528, GB/T 531.1, GB/T 1690, GB/T 3512, GB/T 7759 and GB/T 20739, and it is used with HG/T 2701-2016. It replaces HG/T 2702-1995.

HG/T 2702-2016 falls under ICS 83.140, in the field of rubber and plastics industries.

This catalogue holds 313 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties

GB/T 531.1-2008 — Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)

GB/T 1690-2010 — Rubber, vulcanized or thermoplastic—Determination of the effect of liquids

GB/T 3512-2014 — Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests -- Air-oven method

GB/T 7759-1996 — Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures

GB/T 20739-2006 — Rubber products -- Guidelines for storage

HG/T 2701-2016 — Compression packer rubber elements

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 2702-1995 (earlier edition)

Standards on related subjects:

GB/T 3672.1-2025 — Tolerances for rubber products - Part 1: Dimensional tolerances

HG/T 2579-2008 — Rubber Compounds of O-Rings used for Hydraulic fluid power System

QC/T 639-2004 — Rubber weatherstrips for automobiles

HG/T 6181-2023 — Rubber gaskets for engine oil pans

HG/T 4116-2023 — Rubber gaskets for drum washing machine viewing windows

HG/T 2701-2022 — Compression packer rubber elements

6 Classification and status

International classification (ICS): 83.140

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 2702

EditionTitleRevisionStatus
HG/T 2702-2016Inflatable packer rubber elementscurrent editionCurrent
HG/T 2702-1995Inflatable packer rubber elementsprevious editionSuperseded

This page sells the current edition, HG/T 2702-2016. Earlier editions are listed for reference only.

How to Download HG/T 2702-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2702-2016

$180.00