HG/T 2515-2013Organic sulfur hydrogenation catalysts - Analytical methods for active components (English PDF)
有机硫加氢催化剂活性组分分析方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2515-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
HG/T 2515-2013 is the English-translated version of 有机硫加氢催化剂活性组分分析方法.
HG/T 2515-2013 is the recommended Chinese chemical industry standard that sets out the analytical methods for the active components of organic sulfur hydrogenation catalysts.
It describes how the cobalt (Co) and molybdenum trioxide (MoO3) contents of these catalysts are determined. The methods are written for organic sulfur hydrogenation catalysts whose cobalt and molybdenum trioxide contents have to be measured, and they serve the routine checking of the product.
The standard quotes GB/T 601, GB/T 603, GB/T 6003.1, GB/T 6682 and HG/T 2505. It takes the place of HG/T 2515-2005. Issued on 17 October 2013, it has applied since 1 March 2014.
Found what you need?
Document preview — HG/T 2515-2013
National Standard of the People's Republic of China
- ICS
- 71.100.99
- Replacing
- HG/T 2515-2005
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2515-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.
It replaces the earlier edition HG/T 2515-2005, HG/T 2515-1993.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard that sets out the analytical methods for the active components of organic sulfur hydrogenation catalysts. It describes how the cobalt (Co) and molybdenum trioxide (MoO3) contents of these catalysts are determined. The methods are written for organic sulfur hydrogenation catalysts whose cobalt and molybdenum trioxide contents have to be measured, and they serve the routine checking of the product. The standard quotes GB/T 601, GB/T 603, GB/T 6003.1, GB/T 6682 and HG/T 2505. It takes the place of HG/T 2515-2005.
HG/T 2515-2013 falls under ICS 71.100.99, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 601
GB/T 603
GB/T 6003.1
GB/T 6682
HG/T 2505
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2515-2005 (earlier edition)
HG/T 2515-1993 (earlier edition)
Standards on related subjects:
GB/T 37354-2019 — Analytical method of chemical composition for activated carbon mercury removal catalyst
GB/T 34248-2017 — Performance test method of three-way catalyst
HG/T 2976-2011 — Fertilizer catalysts - Determination of attrition rate
HG/T 2514-2014 — Test method for activity of organic sulphur hydrogenation catalysts
HG/T 2513-2014 — Test method for sulphur capacity of zinc oxide desulfurizers
HG/T 2510-2014 — Test method for activity of methanation catalysts
6 Classification and status
International classification (ICS): 71.100.99
Chinese Standard Classification (CCS): G 74
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 601Chemical Reagent - Preparations of Standard Volumetric Solutions
- GB/T 603Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 6003.1Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- HG/T 2505Organic sulfur hydrogenation catalysts
Similar standards
Editions of HG/T 2515
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2515-2013 | Organic sulfur hydrogenation catalysts - Analytical methods for active components | current edition | Current |
| HG/T 2515-2005 | Organic sulfur hydrogenation catalysts - Analytical methods for active components | previous edition | Superseded |
This page sells the current edition, HG/T 2515-2013. Earlier editions are listed for reference only.
How to Download HG/T 2515-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6003.1-1997 — Test sieves of metal wire cloth
GB/T 6003.1-2012 — Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth
GB/T 6003.1-2022 — Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
HG/T 2515-2013
$115.00