Valid

HG/T 2513-2014Test method for sulphur capacity of zinc oxide desulfurizers (English PDF)

氧化锌脱硫剂硫容试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2513-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 14, 2014

Implementation date

April 1, 2015

Scope

HG/T 2513-2014 is the English-translated version of 氧化锌脱硫剂硫容试验方法.

The sulphur capacity of zinc oxide desulfurizers is measured according to HG/T 2513-2014, a recommended standard of the Chinese chemical industry. It applies to the zinc oxide desulfurizers used to take hydrogen sulfide and part of the organic sulfides out of the feedstocks for ammonia, for hydrogen and for methanol synthesis gas.

The test method is the only matter it settles, the product requirements being left to other texts. It is filed under the Chinese classification G74 and ICS 71.100.99, and it quotes GB/T 601, GB/T 603, GB/T 6003.1, GB/T 6682 and HG/T 2508.

It replaces HG/T 2513-2006. Issued on 14 October 2014, it has applied since 1 April 2015.

Found what you need?

Document preview — HG/T 2513-2014

National Standard of the People's Republic of China

ICS
71.100.99
Replacing
HG/T 2513-2006

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 2513-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 October 2014 and has been in force since 1 April 2015.

It replaces the earlier edition HG/T 2513-2006, HG/T 2513-1993.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

The sulphur capacity of zinc oxide desulfurizers is measured according to HG/T 2513-2014, a recommended standard of the Chinese chemical industry. It applies to the zinc oxide desulfurizers used to take hydrogen sulfide and part of the organic sulfides out of the feedstocks for ammonia, for hydrogen and for methanol synthesis gas. The test method is the only matter it settles, the product requirements being left to other texts. It is filed under the Chinese classification G74 and ICS 71.100.99, and it quotes GB/T 601, GB/T 603, GB/T 6003.1, GB/T 6682 and HG/T 2508. It replaces HG/T 2513-2006.

HG/T 2513-2014 falls under ICS 71.100.99, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 6003.1

GB/T 601

GB/T 603

GB/T 6682

HG/T 2508

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 2513-2006 (earlier edition)

HG/T 2513-1993 (earlier edition)

Standards on related subjects:

GB/T 37354-2019 — Analytical method of chemical composition for activated carbon mercury removal catalyst

GB/T 34248-2017 — Performance test method of three-way catalyst

HG/T 2976-2011 — Fertilizer catalysts - Determination of attrition rate

HG/T 2514-2014 — Test method for activity of organic sulphur hydrogenation catalysts

HG/T 2510-2014 — Test method for activity of methanation catalysts

HG/T 2511-2013 — Methods for chemical composition analysis of methanation catalysts

6 Classification and status

International classification (ICS): 71.100.99

Chinese Standard Classification (CCS): G 74

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 2513

EditionTitleRevisionStatus
HG/T 2513-2014Test method for sulphur capacity of zinc oxide desulfurizerscurrent editionCurrent
HG/T 2513-2006Test method for sulphur capacity of zinc oxide desulfurizersprevious editionSuperseded

This page sells the current edition, HG/T 2513-2014. Earlier editions are listed for reference only.

How to Download HG/T 2513-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2513-2014

$135.00