HG/T 2508-2012Zinc oxide desulfurizers (English PDF)
氧化锌脱硫剂
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2508-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 28, 2012
Implementation date
June 1, 2013
Scope
HG/T 2508-2012 is the English-translated version of 氧化锌脱硫剂.
HG/T 2508-2012 is the recommended Chinese chemical industry standard for zinc oxide desulfurizers. The types it covers are T302Q, T304-1 and T305, and for each it lays down the requirements, the test methods, the inspection rules and the rules for marking, packaging, storage and transport.
These desulfurizers are used in ammonia, hydrogen and methanol synthesis and in organic synthesis gas systems. The standard draws on GB/T 191, GB/T 6678 and GB/T 8170, and on HG/T 2512, HG/T 2513, HG/T 2782 and HG/T 2976.
It takes over from HG 2508-2004. Issued on 28 December 2012, it has applied since 1 June 2013.
Found what you need?
Document preview — HG/T 2508-2012
National Standard of the People's Republic of China
- ICS
- 71.100.99
- Replacing
- HG 2508-2004
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2508-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 December 2012 and has been in force since 1 June 2013.
It replaces the earlier edition HG/T 2508-2004.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for zinc oxide desulfurizers. The types it covers are T302Q, T304-1 and T305, and for each it lays down the requirements, the test methods, the inspection rules and the rules for marking, packaging, storage and transport. These desulfurizers are used in ammonia, hydrogen and methanol synthesis and in organic synthesis gas systems. The standard draws on GB/T 191, GB/T 6678 and GB/T 8170, and on HG/T 2512, HG/T 2513, HG/T 2782 and HG/T 2976. It takes over from HG 2508-2004.
HG/T 2508-2012 falls under ICS 71.100.99, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191
GB/T 6678
GB/T 8170
HG/T 2512
HG/T 2513
HG/T 2782
HG/T 2976
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2508-2004 (earlier edition)
Standards on related subjects:
GB/T 18881-2017 — Catalyst for light-duty petrol vehicle exhaust purification
GB/T 31584-2015 — Plate-type DeNOx catalysts
HG/T 2976-2011 — Fertilizer catalysts - Determination of attrition rate
HG/T 6474-2026 — Paraxylene (PX) adsorbents
HG/T 2509-2012 — Methanation catalysts
HG/T 2505-2012 — Organic sulfur hydrogenation catalysts
6 Classification and status
International classification (ICS): 71.100.99
Chinese Standard Classification (CCS): G 75
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 6678General principles for sampling chemical products
- GB/T 8170Rules of rounding off for numerical values & expression and judgement of limiting values
- HG/T 2512Zinc oxide desulfurizers - Analytical methods for chemical composition
- HG/T 2513Test method for sulphur capacity of zinc oxide desulfurizers
- HG/T 2782Determination of crushing resistance of chemical catalyst particles
Similar standards
Editions of HG/T 2508
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2508-2012 | Zinc oxide desulfurizers | current edition | Current |
| HG 2508-2004 | Zinc oxide desulfurizers | previous edition | Superseded |
This page sells the current edition, HG/T 2508-2012. Earlier editions are listed for reference only.
How to Download HG/T 2508-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
HG/T 2508-2012
$115.00