HG/T 2456.3-2015Aluminium pigments for paints - Part 3: Polymer-coated aluminium paste (English PDF)
涂料用铝颜料 第3部分:聚合物包覆铝粉浆
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2456.3-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 14, 2015
Implementation date
January 1, 2016
Scope
HG/T 2456.3-2015 is the English-translated version of 涂料用铝颜料 第3部分:聚合物包覆铝粉浆.
HG/T 2456.3-2015 carries Part 3 of the recommended Chinese chemical industry standard for aluminium pigments for paints, the part given over to polymer-coated aluminium paste.
It classifies the product and states its requirements, sampling, test methods, inspection rules, marking, packaging and storage.
The paste it describes starts from atomised aluminium powder that is wet-milled with a polymer surface treatment agent and an organic solvent, after which organic compounds bearing active groups react to coat the flake aluminium particles; the pigment goes mainly to the coatings industry.
Its methods come from GB/T 1725, GB/T 1766, GB/T 3186, GB/T 6682, GB/T 6890, GB/T 8170, GB/T 9271, GB/T 9274 and GB/T 20975.3, GB/T 20975.5 and GB/T 20975.8, with HG/T 2456.1-2013 applying alongside it. Issued on 14 July 2015, it has applied since 1 January 2016.
Found what you need?
Document preview — HG/T 2456.3-2015
National Standard of the People's Republic of China
- ICS
- 87.060.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2456.3-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.
It is one of 6 parts of the HG/T 2456 series.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
HG/T 2456.3-2015 carries Part 3 of the recommended Chinese chemical industry standard for aluminium pigments for paints, the part given over to polymer-coated aluminium paste. It classifies the product and states its requirements, sampling, test methods, inspection rules, marking, packaging and storage. The paste it describes starts from atomised aluminium powder that is wet-milled with a polymer surface treatment agent and an organic solvent, after which organic compounds bearing active groups react to coat the flake aluminium particles; the pigment goes mainly to the coatings industry. Its methods come from GB/T 1725, GB/T 1766, GB/T 3186, GB/T 6682, GB/T 6890, GB/T 8170, GB/T 9271, GB/T 9274 and GB/T 20975.3, GB/T 20975.5 and GB/T 20975.8, with HG/T 2456.1-2013 applying alongside it.
HG/T 2456.3-2015 falls under ICS 87.060.10, in the field of paint and colour industries.
This catalogue holds 140 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1725-2007 — Paints, varnishes and plastics -- Determination of non-volatile-matter content
GB/T 1766-2008 — Paints and Varnishes – Rating Schemes of Degradation of Coats
GB/T 3186
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 6890-2012 — Zinc powder
GB/T 8170
GB/T 9271
GB/T 9274-1988 — Paints and varnishes - Determination of resistance to liquids
GB/T 20975.3-2008 — Methods for chemical analysis of aluminium and aluminium alloys - Part 3: Determination of copper content
GB/T 20975.5-2008 — Methods for chemical analysis of aluminium and aluminium alloys - Part 5: Determination of silicon content
GB/T 20975.8-2008 — Methods for chemical analysis of aluminium and aluminium alloys - Part 8: Determination of zinc content
HG/T 2456.1-2013 — Aluminium pigments for paints - Part 1: Aluminium paste
4 Where this standard sits
It cites 12 standards, among them GB/T 1725-2007, GB/T 1766-2008, GB/T 6682-2008, listed in full above.
It is one part of the HG/T 2456 series, of which this catalogue holds 6 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
HG/T 2456-1993 — Aluminum paste
HG/T 2456.1-2013 — Part 1: Aluminium paste
HG/T 2456.2-2016 — Part 2: Aluminium powder
HG/T 2456.4-2015 — Part 4: Vacuum metallized aluminium suspension
HG/T 2456.5-2016 — Part 5: Water-based aluminium paste
Standards on related subjects:
HG/T 4715-2014 — 3,4-Dichloronitrobenzene
HG/T 3989-2014 — Resorcinol (1,3-benzenediol)
HG/T 3852-2006 — Pigments - Determination of residue on sieve
7 Classification and status
International classification (ICS): 87.060.10
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1725-2007Paints, varnishes and plastics -- Determination of non-volatile-matter content
- GB/T 1766-2008Paints and Varnishes – Rating Schemes of Degradation of Coats
- GB/T 3186Paints, varnishes and raw materials for paints and varnishes -- Sampling
- GB/T 6682-2008Water for analytical laboratory use - Specification and test methods
- GB/T 6890-2012Zinc powder
- GB/T 8170Rules of rounding off for numerical values & expression and judgement of limiting values
Similar standards
How to Download HG/T 2456.3-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1725-2007 — Paints, varnishes and plastics -- Determination of non-volatile-matter content
GB/T 1766-2008 — Paints and Varnishes – Rating Schemes of Degradation of Coats
GB/T 20975.3-2008 — Methods for chemical analysis of aluminium and aluminium alloys - Part 3: Determination of copper content
HG/T 2456.3-2015
$195.00