Valid

HG/T 2366-2015Dimethyl silicone oil (English PDF)

二甲基硅油

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2366-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 11, 2015

Implementation date

October 1, 2015

Scope

HG/T 2366-2015 is the English-translated version of 二甲基硅油.

HG/T 2366-2015 is the recommended chemical industry standard of China for dimethyl silicone oil, the trimethylsiloxy-terminated polydimethylsiloxane. It gives the structural formula and the product models, then the requirements, the test methods and the inspection rules, and it closes with marking, packaging, transportation and storage.

It covers the oil made by catalytic polymerisation from octamethylcyclotetrasiloxane, from dimethylsiloxane cyclic bodies or from mixed dimethylsiloxane hydrolysate, with hexamethyldisiloxane added.

Oil prepared from cyclic bodies recovered by the pyrolysis of by-products or waste is outside its scope. The standard is classified G32 in the Chinese scheme, and it replaces HG/T 2366-1992. Issued on 11 May 2015, it has applied since 1 October 2015.

Found what you need?

Document preview — HG/T 2366-2015

National Standard of the People's Republic of China

Replacing
HG/T 2366-1992

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 2366-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 May 2015 and has been in force since 1 October 2015.

It replaces the earlier edition HG/T 2366-1992.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the recommended chemical industry standard of China for dimethyl silicone oil, the trimethylsiloxy-terminated polydimethylsiloxane. It gives the structural formula and the product models, then the requirements, the test methods and the inspection rules, and it closes with marking, packaging, transportation and storage. It covers the oil made by catalytic polymerisation from octamethylcyclotetrasiloxane, from dimethylsiloxane cyclic bodies or from mixed dimethylsiloxane hydrolysate, with hexamethyldisiloxane added. Oil prepared from cyclic bodies recovered by the pyrolysis of by-products or waste is outside its scope. The standard is classified G32 in the Chinese scheme, and it replaces HG/T 2366-1992.

HG/T 2366-2015 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,683 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 Normative references

GB/T 601-2002 — Chemical reagent - Preparations of standard volumetric solutions

GB/T 3536-2008 — Petroleum products -- Determination of flash and fire points -- Cleveland open cup method

GB/T 4472-2011 — Detemination of density and relative density for chemical products

GB/T 6488

GB/T 6678

GB/T 6680-2003 — General rules for sampling liquid chemical products

GB/T 6682

GB/T 8170

GB/T 10247-2008 — Methods of viscosity measurement

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 2366-1992 (earlier edition)

Standards on related subjects:

QB/T 2080-2018 — Flexible cellular polymeric materials - High-resilience polyurethane foam

GB/T 1843-2008 — Plastics - Determination of izod impact strength

HG/T 2624-1994 — Microporous Styrene Type Weak Basic Anion Exchange Resin D 301-FC

HG/T 6416-2025 — Aromatic polyurethane system for automobile sunroof glass encapsulation

HG/T 6394-2025 — Plastics - Glass fiber reinforced liquid crystalline polymer (LCP) compound

HG/T 6385-2025 — Plastics - Polycarbonate/acrylonitrile-butadiene styrene (PC/ABS) material for power battery module housing

6 Classification and status

Chinese Standard Classification (CCS): G 32

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 2366

EditionTitleRevisionStatus
HG/T 2366-2015Dimethyl silicone oilcurrent editionCurrent
HG/T 2366-1992Dimethyl silicone oilprevious editionSuperseded

This page sells the current edition, HG/T 2366-2015. Earlier editions are listed for reference only.

How to Download HG/T 2366-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2366-2015

$195.00