HG/T 2240-2012Moisture-curing polyurethane coatings (single-component) (English PDF)
潮(湿)气固化聚氨酯涂料(单组分)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2240-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2012
Implementation date
March 1, 2013
Scope
HG/T 2240-2012 is the English-translated version of 潮(湿)气固化聚氨酯涂料(单组分).
HG/T 2240-2012 is the recommended Chinese chemical industry standard for single-package moisture-cured polyurethane coatings. It sets out how these coatings are classified and what is required of them, together with the test methods, the inspection rules and the provisions for marking, packaging and storage.
The coatings in its scope are those built on polyisocyanate prepolymers terminated with -NCO groups, which harden on contact with atmospheric moisture. It quotes the general paint methods GB/T 1722-1992, GB/T 1732-1993, GB/T 1766-2008, GB/T 1768-2006, GB/T 6739-2006, GB/T 9271-2008 and GB/T 9274-1988, among the other documents it quotes.
It replaces the first edition, HG/T 2240-1991. Issued on 7 November 2012, it has applied since 1 March 2013.
Found what you need?
Document preview — HG/T 2240-2012
National Standard of the People's Republic of China
- ICS
- 87.040
- Replacing
- HG/T 2240-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2240-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.
It replaces the earlier edition HG/T 2240-1991.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for single-package moisture-cured polyurethane coatings. It sets out how these coatings are classified and what is required of them, together with the test methods, the inspection rules and the provisions for marking, packaging and storage. The coatings in its scope are those built on polyisocyanate prepolymers terminated with -NCO groups, which harden on contact with atmospheric moisture. It quotes the general paint methods GB/T 1722-1992, GB/T 1732-1993, GB/T 1766-2008, GB/T 1768-2006, GB/T 6739-2006, GB/T 9271-2008 and GB/T 9274-1988, among the other documents it quotes. It replaces the first edition, HG/T 2240-1991.
HG/T 2240-2012 falls under ICS 87.040, in the field of paint and colour industries.
This catalogue holds 140 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1722-1992 — Estimation of colour of varnishes,boiledoils and thinners
GB/T 1728-1979 — Methods of test for drying time of coatings of paints and putties
GB/T 1732-1993 — Determination of impact resistance of film
GB/T 1766-2008 — Paints and Varnishes – Rating Schemes of Degradation of Coats
GB/T 1768-2006 — Paints and varnishes -- Determination of resistance to abrasion -- Rotating abrasive rubber wheel method
GB/T 3186
GB/T 4893.1-2005 — Furniture - Assessment of surface resistance to cold liquids
GB/T 4893.3-2005 — Furniture - Assessment of surface resistance to dry heat
GB/T 4893.9-1992 — Furniture--Test for surfaces--Assessment of resistance to impact
GB/T 6682
GB/T 6739-2006 — Paints and varnishes - Determination of film hardness by pencil test
GB/T 6742-2007 — Paints and varnishes -- Bend test (cylindrical mandrel)
GB/T 8170
GB/T 9271-2008 — Paints and varnishes standard panels for testing
GB/T 9274-1988 — Paints and varnishes - Determination of resistance to liquids
GB/T 9278
GB/T 9286-199
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2240-1991 (earlier edition)
Standards on related subjects:
HJ 2537-2014 — Technical requirements for environmental labeling products - Water based coatings
HG/T 3655-2012 — Ultraviolet (UV) curing wood coatings
HJ 2515-2012 — Technical requirement for environmental labeling products - Ship anti-fouling paints
HG/T 2247-2012 — Rare earth driers for coatings
HG/T 2245-2012 — Nitrocellulose lacquers for pencils
HG/T 2239-2012 — Epoxy ester primers
6 Classification and status
International classification (ICS): 87.040
Chinese Standard Classification (CCS): G 51
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1722-1992Estimation of colour of varnishes,boiledoils and thinners
- GB/T 1728-1979Determination of drying time of coating and putty films
- GB/T 1732-1993Determination of impact resistance of coating films
- GB/T 1766-2008Paints and Varnishes – Rating Schemes of Degradation of Coats
- GB/T 1768-2006Paints and varnishes -- Determination of resistance to abrasion -- Rotating abrasive rubber wheel method
- GB/T 3186Paints, varnishes and raw materials for paints and varnishes -- Sampling
Similar standards
Editions of HG/T 2240
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2240-2012 | Moisture-curing polyurethane coatings (single-component) | current edition | Current |
| HG/T 2240-1991 | Moisture-curing polyurethane coatings (single-component) | previous edition | Superseded |
This page sells the current edition, HG/T 2240-2012. Earlier editions are listed for reference only.
How to Download HG/T 2240-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1722-1992 — Estimation of colour of varnishes,boiledoils and thinners
GB/T 1728-1979 — Methods of test for drying time of coatings of paints and putties
GB/T 1732-1993 — Determination of impact resistance of film
HG/T 2240-2012
$105.00