HG/T 2158-2011Industrial circulating cooling water - Determination of ammonium - Distillation and titration method (English PDF)
工业循环冷却水中铵的测定 蒸馏和滴定法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2158-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 2158-2011 is the English-translated version of 工业循环冷却水中铵的测定 蒸馏和滴定法.
The distillation and titration method for ammonium in industrial circulating cooling water is laid down in HG/T 2158-2011, a recommended Chinese chemical industry standard.
The procedure determines the ammonium content, expressed as nitrogen, from 0.50 mg/L up to 100.0 mg/L. It is a non-equivalent adoption of ISO 5664-1984. Standard solutions and reagents are prepared according to GB/T 601 and GB/T 603.
The method carries the Chinese classification G76 and the international classifications 13.060.25 and 71.040.40, and it supersedes HG/T 2158-1991. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 2158-2011
National Standard of the People's Republic of China
- ICS
- 13.060.25
- Replacing
- HG/T 2158-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2158-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 2158-1991.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
The distillation and titration method for ammonium in industrial circulating cooling water is laid down in HG/T 2158-2011, a recommended Chinese chemical industry standard. The procedure determines the ammonium content, expressed as nitrogen, from 0.50 mg/L up to 100.0 mg/L. It is a non-equivalent adoption of ISO 5664-1984. Standard solutions and reagents are prepared according to GB/T 601 and GB/T 603. The method carries the Chinese classification G76 and the international classifications 13.060.25 and 71.040.40, and it supersedes HG/T 2158-1991.
HG/T 2158-2011 falls under ICS 13.060.25, in the field of environment and health protection, safety.
This catalogue holds 95 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 601
GB/T 603
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2158-1991 (earlier edition)
Standards on related subjects:
GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water
GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule
GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness
HG/T 2160-2024 — Dynamic simulation test method for cooling water
HG/T 2157-2011 — Industrial circulating cooling water - Determination of ammonium - Potentiometric method
HG/T 2156-2009 — Determination of anionic surfactants in industrial circulating cooling water - Methylene blue spectrophotometric method
6 Classification and status
International classification (ICS): 13.060.25
Chinese Standard Classification (CCS): G 76
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 2158
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2158-2011 | Industrial circulating cooling water - Determination of ammonium - Distillation and titration method | current edition | Current |
| HG/T 2158-1991 | Industrial circulating cooling water - Determination of ammonium - Distillation and titration method | previous edition | Superseded |
This page sells the current edition, HG/T 2158-2011. Earlier editions are listed for reference only.
How to Download HG/T 2158-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 601-1988 — Chemical reagent--Preparations of standard volumetric solutions
GB/T 601-2002 — Chemical reagent - Preparations of standard volumetric solutions
GB/T 601-2016 — Chemical Reagent - Preparations of Standard Volumetric Solutions
HG/T 2158-2011
$125.00