Valid

HG/T 2150-2009Rubber and plastics calenders - Test methods (English PDF)

橡胶塑料压延机检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2150-2009 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 4, 2009

Implementation date

June 1, 2010

Scope

HG/T 2150-2009 is the English-translated version of 橡胶塑料压延机检测方法.

HG/T 2150-2009 is a recommended Chinese chemical industry standard that describes how calenders for rubber and plastics are measured and tested. It sets out the test conditions, the measuring instruments and the methods used when the product requirements and the safety requirements of the machine are checked.

Its scope is the testing of calenders used in rubber and plastics processing, and it is classified G95 in the Chinese scheme, under the ICS headings 71.120 and 83.200.

HG/T 2108 and HG/T 3118 are the standards quoted in it. It takes the place of HG/T 2150-1991. Issued on 4 December 2009, it has applied since 1 June 2010.

Found what you need?

Document preview — HG/T 2150-2009

National Standard of the People's Republic of China

ICS
71.120
Replacing
HG/T 2150-1991

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 2150-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 December 2009 and has been in force since 1 June 2010.

It replaces the earlier edition HG/T 2150-1991.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese chemical industry standard that describes how calenders for rubber and plastics are measured and tested. It sets out the test conditions, the measuring instruments and the methods used when the product requirements and the safety requirements of the machine are checked. Its scope is the testing of calenders used in rubber and plastics processing, and it is classified G95 in the Chinese scheme, under the ICS headings 71.120 and 83.200. HG/T 2108 and HG/T 3118 are the standards quoted in it. It takes the place of HG/T 2150-1991.

HG/T 2150-2009 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

HG/T 2108

HG/T 3118

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 2150-1991 (earlier edition)

Standards on related subjects:

GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines

JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines

GB 20055-2006 — Safety requirements of mill for rubber and plastics

HG/T 2147-2011 — Rubber embossing calenders

HG/T 2146-2011 — Bladder curing presses

HG/T 2148-2009 — Rubber and plastics internal mixers - Test methods

6 Classification and status

International classification (ICS): 71.120

Chinese Standard Classification (CCS): G 95

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 2150

EditionTitleRevisionStatus
HG/T 2150-2009Rubber and plastics calenders - Test methodscurrent editionCurrent
HG/T 2150-1991Rubber and plastics calenders - Test methodsprevious editionSuperseded

This page sells the current edition, HG/T 2150-2009. Earlier editions are listed for reference only.

How to Download HG/T 2150-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2150-2009

$105.00