GB/Z 44383-2024Test method development - Gudielines for substance selection (English PDF)
检测方法开发 物质选择指南
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/Z 44383-2024 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 23, 2024
Implementation date
August 23, 2024
Scope
GB/Z 44383-2024 is the English-translated version of 检测方法开发 物质选择指南.
GB/Z 44383-2024 sets out how to choose the substances a test method standard will cover; it is a guiding technical document, not a mandatory standard, modified from IEC TR 62936:2016.
It gives the process flow and its steps: the chemical substance list, the selection procedure, the selection principles, other relevant standards, and the final selection.
Candidates come mainly from the IEC 62474 material declaration database and fall into three criteria: currently regulated, awaiting evaluation, and reported only for common market requirements.
Table 1 cites GB/T 39560 (all parts) instead of the IEC 62321 series, and an informative annex records a pilot study on RoHS II priority substances. It applies to substance screening and selection driven by regulatory roadmaps and market requirements. It was issued on 23 August 2024.
Found what you need?
Document preview — GB/Z 44383-2024
National Standard of the People's Republic of China
- ICS
- 13.020.01
- Classification
- L 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, definitions and abbreviations
- 3.1 Terms and Definitions
- 3.2 Abbreviations
- 4 Process Flow
- 5 Process steps
- 5.1 List of Chemical Substances
- 5.2 Material selection procedure
- 5.3 Principles of material selection
- 5.4 Existence of other relevant standards
- 5.5 Final material selection
- Appendix A (Informative) Pilot study on RoHSII priority substances
- References
- Foreword
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting is required.
This document is modified to adopt IEC TR 62936:2016 "Guide to Material Selection for Test Method Development", and the document type is changed from IEC Technical The report was adjusted to become my country's national standardization guiding technical document.
Technical differences between this document and IEC TR 62936:2016.
a) The scope of the standard has been rewritten to comply with the requirements of the standard writing in my country (see Chapter 1);
b) The IEC and ISO terminology database contents in the terms and definitions have been deleted. After being converted into Chinese standards, these contents are consistent with this document.
Not relevant (see 3.1);
c) In Table 1, the "IEC 62321 (all parts)" series standard is changed to the corresponding national standard "GB/T 39560 (all parts)".
In line with my country's national conditions.
Introduction
Many chemicals are being regulated or are under regulatory consideration, so it is necessary to develop a variety of reliable and acceptable detection methods.
For consistency demonstration, the parties concerned must reach a consensus that a particular test method is technically It is correct in all respects (i.e. it provides reliable analytical results), suitable for the samples to be analyzed, tested and reviewed by technical experts, and applied without bias.
Usually developed and published by a standardization technical organization (such as IEC /TC 111, SAC/TC 297 or related industry standardization technical organizations).
Due to limited resources and the associated development process and time, only Develop detection methods for a limited number of chemical substances.
This document provides a standard process for the development of test methods for the logical screening, prioritization, and selection of candidate substances.
The candidate substances list is divided into several groups according to their relative importance. This document is aimed at electronic and electrical products, so the candidate substances mainly come from The list of substances related to material declarations recorded in the IEC 62474 database [2] is not comprehensive.
Substances are divided into 3 major categories, which are briefly described below.
-- Criterion 1."Currently regulated" or "explicitly included in relevant national laws or regulations". The laws or regulations apply to electronic equipment.
gas products and take effect on a specific date.
-- Criterion 2.Substances or groups of substances that are "for evaluation" or meet Criterion 1, but laws or regulations do not yet provide specific requirements for these substances.
The effective date of the entity.
-- Criterion 3."For reference only" or does not meet the requirements of Criterion 1 or Criterion 2.However, for reporting this A substance or group of substances for which there are recognized common market requirements across the industry.
In addition to regulated substances, market requirements are also a major consideration in developing test method standards.
Examples of market-driven requirements include the requirement for certain chemicals in a product's supply chain.
Although there is no legal obligation for electrical and electronic equipment to meet these initiatives, if they do not meet the requirements In many cases, if these requirements are not met, the supplier's products may be delisted.
Eliminate procurement considerations.
The screening process is designed to screen out the majority of substances for consideration, leaving only the "critical few" for further consideration.
Given the rapidly changing environment, the screening criteria may or may not be the most appropriate for the substance under consideration. Therefore, caution is required when interpreting the score results.
Some judgement is required. The final selection process is designed to be able to consider additional requirements or criteria that were not captured by the initial screening process. In addition, Subjective criteria (relative importance cannot be measured). Due to the changing requirements of the regulatory and market environment, this document does not provide a final selection process.
Determine the criteria.
1 Scope
This document provides guidance on the selection of substances during the development of test method standards and also gives the main sources of candidate substances.
Information from the IEC 62474 database.
This document is applicable to the substance screening and selection process for other substances under regulatory roadmaps and market requirements.
2 Normative references
This document has no normative references.
3 Terms, definitions and abbreviations
3.1 Terms and Definitions
There are no terms or definitions that require definition in this document.
3.2 Abbreviations
The following abbreviations apply to this document.
CMR carcinogenic, mutagenic or toxic to reproduction
CoRAP Community Rolling Action Plan
EEE electrical and electronic equipment
REACH Registration, Evaluation, Authorization and Restriction of Chemicals of chemicals
RoHS Restriction of Hazardous Substances
SDO Standards Development Organization
SIN replace it now
SVHC substances of very high concern
4 Process Flow
To determine their suitability for use in electrical and electronic products, substances listed in the IEC 62474 database have undergone a technical review.
Effective initial screening to narrow down the number of substances to be considered for test method development within the standard range. These substances have been evaluated, Substances not included in the IEC 62474 database are also subject to a technical review type of evaluation. Figure 1 shows the chemical Flowchart of the quality selection process.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/Z 44383-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/Z 102.17-2026 — Semiconductor devices - Discrete devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation
GB/Z 103-2026 — Health informatics - The architecture of internet healthcare service network
GB/Z 108-2026 — Health informatics - Internet healthcare service pattern
GB/Z 44383-2024
$255.00