Valid

GB/Z 32490-2016Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for determining backgrounds (English PDF)

表面化学分析 X射线光电子能谱 确定本底的程序

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 32490-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

February 24, 2016

Implementation date

February 24, 2016

Scope

GB/Z 32490-2016 is the English-translated version of 表面化学分析 X射线光电子能谱 确定本底的程序.

GB/Z 32490-2016 is a guiding technical document, not a mandatory standard, that explains how to determine the background in X-ray photoelectron spectroscopy.

It sets out the background types that arise in XPS, from inelastically scattered electrons, secondary electron cascades and photoelectrons excited by non-monochromatic X-ray lines and bremsstrahlung, then gives procedures for subtracting X-ray satellite peaks and for estimating and subtracting inelastic electron scattering.

Further procedures separate inelastic from elastic scattering, address surface and core-hole excitation effects and non-uniform materials, and a final clause compares the different subtraction procedures.

Clause 1 applies the guidance to background determination in X-ray excited photoelectron and Auger electron spectra from solid surfaces, and the text notes that the background types considered do not include the contribution of noise.

It is an identical adoption of ISO/TR 18392:2005. It was issued on 24 February 2016.

Found what you need?

Document preview — GB/Z 32490-2016

National Standard of the People's Republic of China

ICS
71.040.40
Classification
G 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Terms and definitions
  • 3 Abbreviations
  • 4 XPS background type
  • 5 subtraction of X-ray satellite peaks in the electron spectrum
  • 6 Estimation and deduction of inelastic electron scattering in electron spectroscopy
  • 6.1 Overview
  • 6.2 Analysis of inelastic electron scattering procedures
  • 6.3 Procedures for resolving inelastic and elastic scattering
  • 6.4 not commonly used procedures
  • 6.5 Surface and inner shell hole effect in determining the role of background
  • 6.6 Determine the background of non-uniform material
  • 7 Comparison of inelastic scattering effects in electron spectroscopy
  • Reference

Foreword

This instructional document has been drafted in accordance with the rules given in GB/T 1.1-2009.

This guidance document uses the translation method identical with ISO /T R18932..2005 "Surface chemical analysis X-ray photoelectron energy Spectrum to determine the background of the program. "

Introduction

This guidance document provides guidelines for determining the background of X-ray photoelectron spectroscopy (XPS). Described in this technical document The established background method is suitable for the quantification of X-ray photoelectrons and Auger electron spectra excited from solid surfaces and surface nanostructures Evaluation.

The background determination of X-ray photoelectron spectroscopy is based on the following requirements. (1) chemical composition of the surface and interface layers and nanostructures (Including components that vary with depth); (2) Accurately determine the chemical state of various surface components; (3) From photoelectron spectroscopy Take the solid electronic structure information. The intrinsic spectrum is photoionization or photoexcitation generated by the X-ray of interest in XPS and Auger Sub-decay process and require further analysis, thus separating the intrinsic part of the spectrum from the spectrum (background) generated by other processes It is necessary. The widely used program for XPS background subtraction has been reviewed in detail in [1-4]. This guidance document is summarized The most commonly used procedures and applications, including (i) commercial software, are provided and used by (i) advanced laboratories and (ii) individual laboratories For in-depth understanding of the XPS spectrum used in the process.

1 Scope

This guidance document provides guidelines for determining background in X-ray photoelectron spectroscopy. This guidance applies to solids Background Determination of Surface X-ray Excited Photoelectrons and Auger Electron Spectroscopy.

2 Terms and definitions

ISO 18115 defined terms and definitions apply to this document [5].

3 Abbreviations

The following abbreviations apply to this document.

AES Auger electron spectroscopy (Augerelectronspectroscopy)

PIA intensity analysis (Partial Intensityanalysis)

QUASESTM Electron Spectroscopy Surface Quantitative Analysis (Quantitativeanalysisofsurfacesbyelectronspectroscopy)

REELS reflected electron energy loss spectrum (Reflectionelectronenergosospectroscopy)

XPS X-ray photoelectron spectroscopy (X-rayphotoelectronspectroscopy)

4 The type of background in XPS

The surface excited by X-ray irradiation is caused by the decay of photoelectrons or core-level holes generated by a photoionization process Auger electron. The inelastic scattering electrons in the sample, the secondary electron cascade collision and the non-monochromatic X-ray irradiation by the X-ray line and The bremsstrahlung-excited photoelectrons all contribute to the spectrum (ie, the electron energy distribution) and constitute the background. In actual XPS, it is usually not necessary Determine the background of the secondary electron cascade collision at the low energy end.

Chapter 5 of this guidance document describes a method of subtracting satellite peaks, and Chapter 6 describes methods of subtracting inelastic electron scattering, Chapter 7 simply compares the effects of various programs that deduct inelastic electron scattering effects from electron spectrograms.

Notes 1. In some cases, the strength of the intrinsic part consists of the "lossless" main peak and the various electron excitations associated with generating hole-level holes. Sometimes The latter's intrinsic contribution is expressed as "intrinsic background." Identifying the various eigenvalue peaks and measuring their intensity is important for the quantitative application of XPS.

Note 2. Noise-induced fluctuations in the signal over time can cause signal strength uncertainty. The background type discussed in this guidance document is not Including the contribution of noise to the intensity.

5 Electron spectroscopy X-ray satellite peak deduction

The non-monochromatic X-ray source has a fixed chaser structure associated with the main X-ray (usually Al or Mg Ka radiation) The corresponding satellite peaks appear in the XPS spectrum.

For selected optoelectronic peaks measured using Al or Mg X-ray sources, X-ray correlations with Kalpha3,4, Kbeta, etc., The difference in energy between them and their intensity ratio [6] contribute to the deduction of satellite peaks at the high kinetic energy side. In this way, X-ray-excited photoelectron satellites Peaks can be deducted proportionately. Use the same method to sequentially deduct satellite peaks associated with other photoelectron peaks. If the auger peak mistaken for light

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Similar standards

How to Download GB/Z 32490-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 32490-2016

$175.00