GB/Z 32458-2015Centrifugal pumps handling viscous liquids - Performance corrections (English PDF)
输送粘性液体的离心泵 性能修正
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for GB/Z 32458-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2015
Implementation date
December 31, 2015
Scope
GB/Z 32458-2015 is the English-translated version of 输送粘性液体的离心泵 性能修正.
GB/Z 32458-2015, identical to ISO/TR 17766:2005, gives a method for correcting the performance of centrifugal pumps when they handle viscous liquids rather than the water on which their curves are based.
It covers ordinary single-suction and double-suction pumps with open or closed impellers pumping Newtonian fluids within the normal operating range.
The document defines correction factors for flow, head, efficiency and NPSH, sets out the basic method and a summary of the Hydraulic Institute method, and adds further theoretical explanation and other precautions, with an informative annex on converting kinematic viscosity units.
It is meant to guide pump pre-selection and the conversion of water performance into viscous-liquid performance. It was issued on 31 December 2015.
Found what you need?
Document preview — GB/Z 32458-2015
National Standard of the People's Republic of China
- ICS
- 23.080
- Classification
- J 71
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 symbols and abbreviations
- 3 summary
- 4 Overview
- 5 basic methods
- 6 American Hydraulics Society Summary of Methods
- 8 Other precautions
- Appendix A (informative) kinematic viscosity unit conversion
- References
Foreword
Pump in the selection is generally based on the performance of the pump to send water to choose when the actual delivery of the pump is a wide range of liquid, Body viscosity is also different, which will have a certain impact on the safe operation of the pump. This instructional document provides water delivery by design Centrifugal pump in the delivery of viscous liquid performance correction method used to guide the pump pre-selection and performance conversion.
This instructional document has been drafted in accordance with the rules given in GB/T 1.1-2009.
This guideline uses translation methods equivalent to ISO /T R17766.2005 "Performance of Centrifugal Pumps for the Delivery of Viscous Liquids Positive "(English version).
For ease of use, the following technical editorial changes have been made in this guide.
--- "r/min" instead of "rpm" as the speed unit;
--- In the "symbols and abbreviations" added "Note 2. According to our habits, when calculating the ratio should be multiplied by the coefficient 3.65." Tips Sexual description --- The original standard formula "log" changed to "lg".
This guideline is for reference only. The suggestions and opinions on this technical document may be referred to the standardization administrator of the State Council Management reflects.
1 Scope
This technical note provides technical solutions for the performance correction of all common centrifugal pumps (hereinafter referred to as "pumps") for the transport of viscous liquids.
This guidance applies to single or double suction pumps with open or closed impellers that deliver Newtonian fluid over the normal operating range.
2 Symbols and abbreviations
The symbols and definitions used in this technical paper are as follows. 1).
1) The industry abbreviation NPSHR used in the operation symbols NPSHRBEP-W and NPSHRW in this guidance document has been replaced by ISO /TC115/SC3 permit.
A --- used to calculate the corrected necessary NPSH inhalation geometry variables.
B --- viscosity correction process parameters, parameter B is used to regulate the pump Reynolds number and adjust the pump to modify the specific speed.
BEP --- the best efficiency point (at the specified speed at the highest pump efficiency flow and lift). Ceta --- efficiency correction factor. Ceta-RR --- Efficiency correction factor due to disc friction loss. CH --- head correction factor.
CBEP-H --- water pump at the most efficient flow point head correction factor. CNPSH --- NPSH correction factor.
CQ --- flow correction factor. d2 --- impeller outlet diameter, m (ft). g --- Gravitational acceleration, m/s2 (ft/s2). H --- single-stage head, m (ft).
HBEP-vis --- viscous head, when delivering viscous liquid, the single-stage lift obtained in the best efficiency flow point pump, m (ft).
HBEP-W --- head of water, single-stage lift obtained at the pump's best efficiency flow point when delivering water, in m (ft). HL --- hydraulic loss, m (ft). Hth --- theoretical lift (no loss of flow), m (ft).
Hvis --- viscous head, single-stage head when delivering viscous liquid, m (ft).
Hvis-tot --- viscous head, when the viscous liquid pump delivery total head, m (ft).
HW --- water when the head, when the water delivery single-stage head, m (ft). N --- pump shaft speed, r/min. NS --- Specific rotation, (USCS unit).
NQ0.5BEP-W H0.75BEP-W ns --- specific rotation, (metric units).
NQ0.5BEP-W H0.75BEP-W The specific impeller rotation is defined as a geometrically similar impeller capable of discharging 1 cubic meter per second (m3/s) with a head of 1 meter (metric Unit) or 1 gallon (US) per minute at a lift of 1 foot (USCS units) per minute
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Similar standards
How to Download GB/Z 32458-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/Z 102.17-2026 — Semiconductor devices - Discrete devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation
GB/Z 103-2026 — Health informatics - The architecture of internet healthcare service network
GB/Z 108-2026 — Health informatics - Internet healthcare service pattern
GB/Z 32458-2015
$475.00