Valid

GB/Z 31477-2026Process management for avionics - Application guide for work margin and robustness limit stress testing of avionics equipment (English PDF)

航空电子过程管理 航空电子设备工作裕度和鲁棒性极限应力试验应用指南

Preview PDF

This is a limited preview

Buy now to download the full PDF (28 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 31477-2026 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 2, 2026

Implementation date

July 2, 2026

Scope

GB/Z 31477-2026 is the English-translated version of 航空电子过程管理 航空电子设备工作裕度和鲁棒性极限应力试验应用指南.

GB/Z 31477-2026 is the Chinese standard "Process management for avionics - Application guide for work margin and robustness limit stress testing of avionics equipment".

Its scope clause reads: This document outlines the objectives, basic principles, application scope, and implementation of operational margin and robustness ultimate stress tests for avionics equipment.

This process is primarily aimed at avionics systems project managers, electronic equipment engineering project managers, design engineers, test supervisors, and reliability assurance personnel. team.

The guidelines provided in this document are applicable to all types of avionics projects and help responsible original equipment manufacturers (OEMs) realize equipment as early as possible.

Maturity. Note 1.Ultimate stress testing is often used as an industry strategy for lifecycle cost-benefit management and is not a mandatory requirement for product certification.

Furthermore, customers... The contract terms may specify equipment availability requirements, such as those starting from the EIS or operational phase. Ultimate stress testing is conducted throughout the aviation electrical system.

The design and development phase of sub-equipment involves stresses in mechanical, climatic, and electrical fields.

Mechanical, electro-hydraulic, and electro-pneumatic types, and regardless of size (from "low-level" sub-components such as CCA, mechanical components, connectors, etc., to systems), Applicable to all types of generator sets (including Class A units).

This document is used in conjunction with IEC 62429, IEC 62506, or both, to test the reliability of hardware devices with embedded software.

Note 3.This document can provide assistance in the equipment definition justification process (see CEN-CENELECprEN 9215), for example. ---Assist in developing definition and justification documents (DJDs) by providing relevant data on equipment operating margins and decision-making basis; ---Provides justification for potential future changes to equipment definitions, such as change management in response to the discontinuation of electronic components.

In this document, “defect” refers to “inherent defect” or “weak link”, that is, “defect and its related potential failure or malfunction” (see 3.1.1). This document applies to the avionics industry; other industrial sectors may refer to it for further information. Its clauses include terms, definitions and abbreviations.

Found what you need?

Document preview — GB/Z 31477-2026

National Standard of the People's Republic of China

ICS
49.020
Classification
V 04
Replacing
GB/Z 31477-2015

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1.Scope
  • 2 Normative References
  • 3.Terms, Definitions, and Abbreviations
  • 3.1 Terms and Definitions
  • 3.2 Abbreviations
  • 4.Working margin and robustness ultimate stress test methods
  • 4.2 Objective
  • 4.3 Precautions
  • 4.4 Basic Principles
  • 4.5 Examples of limitations of the ultimate stress test
  • 5.Industrial applications applicable to ultimate stress testing 6.
  • 6.Ultimate stress testing and related stages in the equipment lifecycle.
  • 6.1 Overview
  • 6.2 Design and Development Phase
  • 6.3 Identification Stage
  • 6.4 Production Stage
  • 6.5 Operation and Maintenance Phase
  • 7.Planning and Management of Ultimate Stress Tests
  • 7.1 Overview
  • 7.2 Planning and Budgeting for the Ultimate Stress Test
  • 7.3 Management of Ultimate Stress Tests
  • 8 Typical methods for conducting ultimate stress tests
  • 8.1 Basic Elements of an Efficient Testing Method
  • 8.2 Identification of Potential Inherent Defects/Weaknesses in Equipment
  • 8.3 Selection of Stress Type
  • 8.5 Experiment Implementation
  • 9.Utilizing the experience accumulated from ultimate stress tests
  • 9.1 Overview
  • 9.2 Creating or Optimizing Databases
  • 9.3 Improve procedures and quality system
  • 9.4 Contributions to the ESS definition
  • 9.5 Verify the effectiveness of the ultimate stress test and the maturity of the equipment through feedback
  • 9.6 Promoting the advancement of OEM organizational culture
  • 10 Responsibility and Relationships
  • 10.1 Customer/OEM Relationships
  • 10.2 Relationship between OEM and External Testing Laboratories
  • 11 Costs and Savings
  • 11.1 Overview
  • 11.2 Costs of “Unreliability”
  • 11.3 Cost of ultimate stress test.
  • Appendix A (Informative) Ultimate Stress Test Method
  • Appendix B (Informative) Example 23.Determining the potential stress effect based on the weak points of equipment

1 Scope

This document outlines the objectives, basic principles, application scope, and implementation of operational margin and robustness ultimate stress tests for avionics equipment.

This process is primarily aimed at avionics systems project managers, electronic equipment engineering project managers, design engineers, test supervisors, and reliability assurance personnel.

team.

The guidelines provided in this document are applicable to all types of avionics projects and help responsible original equipment manufacturers (OEMs) realize equipment as early as possible.

Maturity.

Note 1.Ultimate stress testing is often used as an industry strategy for lifecycle cost-benefit management and is not a mandatory requirement for product certification. Furthermore, customers...

The contract terms may specify equipment availability requirements, such as those starting from the EIS or operational phase. Ultimate stress testing is conducted throughout the aviation electrical system.

The design and development phase of sub-equipment involves stresses in mechanical, climatic, and electrical fields.

Mechanical, electro-hydraulic, and electro-pneumatic types, and regardless of size (from "low-level" sub-components such as CCA, mechanical components, connectors, etc., to systems),

Applicable to all types of generator sets (including Class A units).

This document is used in conjunction with IEC 62429, IEC 62506, or both, to test the reliability of hardware devices with embedded software.

Note 3.This document can provide assistance in the equipment definition justification process (see CEN-CENELECprEN 9215), for example.

---Assist in developing definition and justification documents (DJDs) by providing relevant data on equipment operating margins and decision-making basis;

---Provides justification for potential future changes to equipment definitions, such as change management in response to the discontinuation of electronic components.

In this document, “defect” refers to “inherent defect” or “weak link”, that is, “defect and its related potential failure or malfunction” (see 3.1.1).

This document applies to the avionics industry; other industrial sectors may refer to it for further information.

2 Normative references

This document has no normative references.

3 Terms, Definitions and Abbreviations

3.1 Terms and Definitions

The following terms and definitions apply to this document.

3.1.1 built-indeficiency

During the product design or manufacturing process, equipment malfunctions or failures may occur, leading to the equipment being unable to function properly or operate.

Defects, shortcomings, flaws, or anomalies (often referred to as weaknesses).

Note 1.Deviations from state-of-the-art design rules or inaccurate manufacturing process control may pose a risk, for example, at the source of built-in defects in the equipment. Such built-in defects...

Traps are usually considered weak points.

Note 3.Built-in defects are usually latent (existing or potentially existing, but not significant or apparent) and manifest during operation or under specific conditions.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.

Similar standards

Editions of GB/Z 31477

EditionTitleRevisionStatus
GB/Z 31477-2026Process management for avionics - Application guide for work margin and robustness limit stress testing of avionics equipmentcurrent editionCurrent
GB/Z 31477-2015Process management for avionics - Application guide for work margin and robustness limit stress testing of avionics equipmentprevious editionSuperseded

This page sells the current edition, GB/Z 31477-2026. Earlier editions are listed for reference only.

How to Download GB/Z 31477-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
28 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 31477-2026

$495.00