GB/Z 22695-2008Guidelines for the addition of environmental aspects in product standards specific to electrical accessories (English PDF)

Foreword

This instructive technical document is equivalent to IEC TR62139.:2004 (1st Edition) "Specifically for TC23 in the product standard to increase the environment Guide to Factors. " Appendix A and Appendix B of this guidance document are informative appendices.

1 Scope

This guideline technical document is to assist electrical appliance accessory standard setter in helping them to establish standard However, "environmental impact of environmental factors related considerations.

This guidance document includes any suggestions for unifying the relevant environmental aspects into product standards. It is not a convention, Nor does it limit improvements.

The term "environment" as used in these guidance documents is different from that used in national standards or IEC publications in relation to electrical product rings Environmental conditions affect the terms.

Note: As for the environmental conditions of product performance, the reference standard is GB/T 2434, GB/T 2424, GB/T 4796, GB/T 4797, GB/T 4798,

GB/T 20159 and IEC Guide 106.

These instructional technical papers are intended to help standard setters consider relevant environmental aspects and, for that matter, guiding techniques The document is devoted to the application of electrical accessories regulations. It also helps them to review the environmental norms when considering these environmental aspects To maintain a clear method of possible interaction of sexual requirements. At the same time, these guiding technical documents also help standard setters avoid them Make too simple or too strict requirements that may not achieve a beneficial global effect.

2 Normative references

The following documents contain provisions which, through reference in this Guidance Document, become the provisions of this Guidance Note document. All dated Reference documents, all subsequent amendments (not including errata content), or revisions do not apply to this guidance document, however, drums Recipients of the agreement based on this guidance document are encouraged to study whether the latest versions of these documents are applicable. All undated references The latest version of this document applies to this guidance document.

GB/T 20877 Guideline for Introducing Environmental Factors into Electrical Product Standards (IDTIEC Guideline 109)

GB/T 24062 Environmental Management --- Introducing Environmental Factors into Product Design and Development (IDTISO /T R14062)

ISO Guide 64 Guidelines for the inclusion of environmental factors in product standards

3 Terms and definitions

The following terms and definitions apply to this guidance document.