GB/T 41993-2022Sound signalling devices for household and similar purposes (English PDF)

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"

drafting.

This document is modified to adopt IEC 62080.2015 "Sound signaling devices for household and similar purposes".

Compared with IEC 62080.2015, this document has made the following structural adjustments.

---9.2 corresponds to 9.2 and the following suspension sections in IEC 62080.2015;

---13.3.1~13.3.3 respectively correspond to the suspension section of 13.3, 13.3.1 and 13.3.2 in IEC 62080.2015;

---15.1~15.9 respectively correspond to the suspension section and 15.1~15.8 of Chapter 15 in IEC 62080.2015;

---15.6.1~15.6.3 respectively correspond to the suspension section of 15.5, 15.5.1 and 15.5.2 in IEC 62080.2015, add 15.6.1

title;

--- Remove the number corresponding to 22.1 in IEC 62080.2015, because there is no 22.2 in IEC 62080.2015;

---22.1~22.5 respectively correspond to 22.1.1~22.1.5 in IEC 62080.2015;

--- 26.1~26.4 respectively correspond to the suspension section and 26.1~26.3 of Chapter 26 in IEC 62080.2015, adding the title of 26.1;

--- 26.3.1~26.3.7 respectively correspond to the suspension section of 26.2 and 26.2.1~26.2.6 in IEC 62080.2015, add 26.3.1

title;

--- 26.4.1~26.4.5 respectively correspond to the suspension section of 26.3 and 26.3.1~26.3.4 in IEC 62080.2015, add 26.4.1

title;

---A.2.1~A.2.3 respectively correspond to the suspension section of A.2, A.2.1 and A.2.2 in IEC 62080.2015;

--- Remove the number corresponding to A.2.1.1 in IEC 62080.2015, because there is no A.2.1.2 in IEC 62080.2015;

--- A.3.1 corresponds to the title of A.3.1 in IEC 62080.2015;

---A.3.2~A.3.5 corresponds to A.3.1.1~A.3.1.4 in IEC 62080.2015.

The technical differences between this document and IEC 62080.2015 and their reasons are as follows.

--- Added "This document specifies the technical requirements for the structure, mechanical properties and electrical properties of sound signal devices for household and similar purposes.

requirements" to comply with the provisions of GB/T 1.1 (see Chapter 1);

--- Replaced IEC 60068-2-32.1975 with the normatively quoted GB/T 2423.7, which is in line with the actual citations in this document

conditions, in order to adapt to my country's technical conditions and increase operability (see 15.3);

--- Replaced IEC 60068-2-75.1997 with the normatively quoted GB/T 2423.55, which is in line with the actual citations in this document

conditions, in order to adapt to my country's technical conditions and increase operability (see 15.2);

--- Replaced IEC 60112.1979 with the normative referenced GB/T 4207, in line with the actual references in this document, to suit

Adapt to the technical conditions of our country and increase operability (see 23.3);

--- Replaced IEC 60529.1989 with the normative referenced GB/T 4208, in line with the actual references in this document, to suit

Adapt to my country's technical conditions and increase operability (see 6.5, 7.3, 13.2, 13.3.1);

--- Replaced CISPR14 (all parts) with the normatively referenced GB 4343 (all parts), in line with the actual references in this document

In order to adapt to the technical conditions of our country and increase operability (see 26.4.2, 26.4.3, Table B.1);

--- Replaced IEC 60245 (all parts) with the normatively referenced GB/T 5013 (all parts), consistent with the actual

The citation situation of the standard, in order to adapt to the technical conditions of our country and increase the operability (see 9.13, 20.3);

--- Replaced IEC 60227 (all parts) with the normatively referenced GB/T 5023 (all parts), consistent with the actual in this document

The citation situation of the standard, in order to adapt to the technical conditions of our country and increase the operability (see 20.3);

--- Replaced IEC 60695-2-1 (all parts) with the normative references GB/T 5169.10, GB/T 5169.11, conforming to the

The actual citations in the document to adapt to the technical conditions of our country and increase operability (see 24.2);

--- Replaced IEC 60417 (all parts) with the normative referenced GB/T 5465.2-2008, consistent with the actual in this document

Citation conditions to adapt to my country's technical conditions and increase operability (see 7.3, 7.4, 7.5);

--- Replaced IEC 60317 (all parts) with the normatively referenced GB/T 6109.1-2008, consistent with the actual in this document

Citation conditions to adapt to my country's technical conditions and increase operability (see Table 12, A.2.2);

--- Replaced IEC 60384-14.1993 with the normative referenced GB/T 6346.14-2015, which conforms to the actual reference in this document

In order to adapt to the technical conditions of our country and increase operability (see A.3.3);

--- Replaced IEC 60065.1998 with the normative referenced GB 8898-2011, in line with the actual references in this document

conditions, in order to adapt to my country's technical conditions and increase operability (see A.2.2, A.3.4);

--- Replaced IEC 60127 (all parts) with the normatively referenced GB/T 9364 (all parts), consistent with the actual

citations to adapt to my country's technical conditions and increase operability (see A.3.2);

--- Replaced ISO 1456.1988 with the normatively quoted GB/T 9797, which conforms to the actual reference situation in this document, to adapt to

my country's technical conditions, increase operability (see 22.5);

--- Replaced ISO 2081.1986 with the normatively quoted GB/T 9799, which conforms to the actual reference situation in this document, to adapt to

my country's technical conditions, increase operability (see 22.5);

--- Replaced IEC 60212.1971 with the normative referenced GB/T 10580, in line with the actual references in this document, to suit

Adapt to the technical conditions of our country and increase operability (see 24.2);

--- Replaced IEC 60085.1984 with the normative referenced GB/T 11021, in line with the actual references in this document, to suit

Adapt to my country's technical conditions and increase operability (see Table 3);

--- Replaced IEC 60216 (all parts) with the normatively referenced GB/T 11026 (all parts), consistent with the actual

citations to adapt to my country's technical conditions and increase operability (see Table 3);

--- Replaced ISO 2093.1986 with the normative referenced GB/T 12599, in line with the actual references in this document, to suit

Adapt to the technical conditions of our country and increase operability (see 22.5);

--- Replaced IEC 60998 (all parts) with the normatively referenced GB/T 13140 (all parts), consistent with the actual

citations to adapt to my country's technical conditions and increase operability (see Chapter 19);

--- Replaced IEC 60730 (all parts) with the normatively referenced GB/T 14536 (all parts), consistent with the actual

citations to adapt to my country's technical conditions and increase operability (see A.3.5);

--- Replaced IEC 60664-1.1992 with the normative referenced GB/T 16935.1, in line with the actual references in this document

conditions, in order to adapt to my country's technical conditions and increase operability (see 23.1);

--- Replaced IEC 60664-3 with the normative referenced GB/T 16935.3, in line with the actual references in this document, to suit

Adapt to the technical conditions of our country and increase operability (see 23.1);

--- Replaced IEC 60320 (all parts) with the normatively referenced GB/T 17465 (all parts), in line with the actual

The citation situation of the standard, in order to adapt to the technical conditions of our country and increase the operability (see 18.2, 18.3, 20.1);

--- Replaced IEC 60670 (all parts) with the normatively referenced GB/T 17466 (all parts), consistent with the actual

citations to adapt to my country's technical conditions and increase operability (see Chapter 1, 13.3.2);

--- Replaced IEC 61000-3-2.2000 with the normative referenced GB 17625.1, in line with the actual references in this document

In order to adapt to the technical conditions of our country and increase operability (see 26.4.4, Table B.1);

--- Replaced IEC 61000-3-3.1994 with the normative referenced GB/T 17625.2, in line with the actual references in this document

In order to adapt to the technical conditions of our country and increase operability (see 26.4.5, Table B.1);

--- Replaced IEC 61000-4-2.1995 with the normative referenced GB/T 17626.2, in line with the actual references in this document

In order to adapt to the technical conditions of our country and increase operability (see 26.3.6, Table B.1);

--- Replaced IEC 61000-4-3.1995 with the normative referenced GB/T 17626.3, in line with the actual references in this document

In order to adapt to the technical conditions of our country and increase operability (see 26.3.7, Table B.1);

--- Replaced IEC 61000-4-4.1995 with the normatively quoted GB/T 17626.4, which is in line with the actual citations in this document

In order to adapt to the technical conditions of our country and increase operability (see 26.3.5, Table B.1);

--- Replaced IEC 61000-4-5.1995 with the normative referenced GB/T 17626.5, in line with the actual references in this document

In order to adapt to the technical conditions of our country and increase operability (see 26.3.4, Table B.1);

--- Replaced IEC 61000-4-6.1996 with the normative referenced GB/T 17626.6, in line with the actual references in this document

In order to adapt to the technical conditions of our country and increase operability (see 26.3.2, Table B.1);

--- Replaced IEC 61000-4-11.1994 with the normative referenced GB/T 17626.11, in line with the actual references in this document

In order to adapt to the technical conditions of our country and increase operability (see 26.3.3, Table B.1);

--- Replaced IEC 61000-2-2.1990 with the normative referenced GB/T 18039.3, in line with the actual references in this document

conditions, in order to adapt to my country's technical conditions and increase operability (see 26.2);

--- Replaced IEC 61558-1.1997 with the normative referenced GB/T 19212.1, in line with the actual references in this document

In order to adapt to my country's technical conditions and increase operability (see Table 3 and Table 12);

--- Increased the relevant content of the type and size of plug and socket in my country to adapt to the technical conditions of my country and increase operability (see 18.2,

18.3, 18.4);

--- In order to maintain the rigor of the full text, change Figure 8 to "blank".

The following editorial changes have been made to this document.

--- Replaced IEC 60061-3 with informative references to GB/T 1483 (all parts);

--- Replaced IEC 60357 with the informative referenced GB/T 14094;

--- Replaced IEC 61140 (see 3.37) with the informative referenced GB/T 17045-2020;

--- Replaced IEC 60238 with the informative referenced GB/T 17935;

--- Replaced IEC 61184 with the informative referenced GB/T 17936;

--- Replaced IEC 60061-2 with the informative referenced GB/T 19148;

--- Replaced IEC 60838 (all parts) with informative references to GB/T 19651 (all parts).

Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.

1 Scope

This document specifies the technical requirements for the structure, mechanical properties and electrical properties of sound signaling devices for household and similar purposes.

This document applies to household and similar uses with a rated voltage not exceeding 250Va.c. or 250Vd.c. and with a rated input power not exceeding

100VA sound signaling devices with integral enclosures and intended to be incorporated in enclosures conforming to GB/T 17466 (all parts) or accompanying

Acoustic signaling device provided together with the housing. In these sound signaling devices, it may also include instructions with a rated input power not exceeding 10VA.

lights.

These products are referred to as "devices" in this document.

This document applies to fixed, mobile and plug-in installations for indoor or outdoor use.

In places with special conditions, special structures may be required.

Note 1.This document can be used as a guide for the technical requirements of sound signaling devices with voltages below 50Va.c. or 75Vd.c. voltages under consideration are below

Additional requirements for 50Va.c. or 75Vd.c. sound signaling devices.

Note 2.This document does not contain radio transmission and reception functions.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references

For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to

this document.

GB/T 1002 Types, basic parameters and dimensions of single-phase plugs and sockets for household and similar purposes

GB/T 1003 Types, basic parameters and dimensions of three-phase plugs and sockets for household and similar purposes

GB/T 2423.7 Environmental testing Part 2.Test method Test Ec. Shock caused by rough handling (mainly used for equipment type

Sample) (GB/T 2423.7-2018, IEC 60068-2-31.2008, IDT)

GB/T 2423.55 Environmental testing for electric and electronic products - Part 2.Environmental testing Test Eh. Hammer test

(GB/T 2423.55-2006, IEC 60068-2-75.1997, IDT)

GB/T 4207 Method for determination of tracking resistance index and relative tracking index of solid insulating materials (GB/T 4207-2012,

IEC 60112.2009, IDT)

GB/T 4208 Enclosure protection level (IP code) (GB/T 4208-2017, IEC 60529.2013, IDT)

GB 4343 (all parts) Electromagnetic compatibility requirements for household appliances, electric tools and similar appliances [CISPR14 (all parts)]

Note. GB 4343.1 Electromagnetic Compatibility Requirements for Household Appliances, Electric Tools and Similar Appliances Part 1.Emission (GB 4343.1-2018, CISPR14-1.

2011, IDT);

GB/T 4343.2 Electromagnetic Compatibility Requirements for Household Appliances, Electric Tools and Similar Appliances Part 2.Immunity (GB/T 4343.2-2020,

CISPR14-2.2015, IDT).

GB 4343.1-2018 Electromagnetic Compatibility Requirements for Household Appliances, Electric Tools and Similar Appliances Part 1.Emission (CISPR14-

1.2011, IDT)

GB/T 5013 (all parts) Rubber insulated cables with rated voltages up to and including 450/750V [IEC 60245 (all parts)]

Note. GB/T 5013.1 Rated voltage 450/750V and below rubber insulated cables Part 1.General requirements (GB/T 5013.1-2008,

IEC 60245-1.2003, IDT);