Valid

GB/Z 18700.4-2002Telecontrol equipment and systems - Part 6-602: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE transport profiles (English PDF)

远动设备及系统 第6-602部分:与ISO标准和ITU-T建议兼容的远动协议 TASE传输协议子集

Preview PDF

This is a limited preview

Buy now to download the full PDF (19 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 18700.4-2002 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 29, 2002

Implementation date

November 29, 2002

Scope

GB/Z 18700.4-2002 is the English-translated version of 远动设备及系统 第6-602部分:与ISO标准和ITU-T建议兼容的远动协议 TASE传输协议子集.

GB/Z 18700.4-2002 is the Chinese standard "Telecontrol equipment and systems - Part 6-602: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE transport profiles". Its scope clause reads: This Standard specifies the transport protocol subset.

Found what you need?

Document preview — GB/Z 18700.4-2002

National Standard of the People's Republic of China

ICS
33.200
Classification
F 21

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope

1 Scope

This Standard specifies the transport protocol subset.

This is actually a subset of the transport protocol using standard or de facto standard (including TCP/IP) on any type of transmission medium connection mode or connectionless-mode network service.

The transport protocol for remote communication subset Architecture (TCA) part.

Foreword

This document was issued on 29 November 2002 by the State Administration for Market Regulation and the Standardization Administration of the People's Republic of China, and has been in force since 29 November 2002.

It is the first edition of this standard.

The document is under the responsibility of the China Electricity Council.

Classification: ICS 33.200, CCS F 21.

About this edition

GB/Z 18700.4-2002 is the first edition of this standard. It was issued on 29 November 2002 and has been in force since 29 November 2002.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite GB/Z 18700.4-2002 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.

Edition history and citation

GB/Z 18700.4-2002 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite GB/Z 18700.4-2002 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

GB/Z 18700.4-2002 is classified under ICS 33.200, in the field of telecommunications. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.

Its Chinese Standard Classification code is CCS F 21. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.

The GB/Z prefix marks a guiding technical document, which is a third category beside the mandatory GB and the recommended GB/T. It is issued when a subject is moving too fast, or is too varied in practice, to be settled in a standard: it records the direction the Chinese standardization system intends to take and the vocabulary it intends to use. It carries no compliance obligation and does not become binding when a contract cites it — which is also why GB/Z 18700.4-2002 is worth reading early, before the requirements it anticipates arrive as a standard.

The document is under the responsibility of the China Electricity Council, which is the body that maintains it and that will answer a formal question about its interpretation.

How this standard is designated

The full designation is GB/Z 18700.4-2002. A citation should carry the number with its year, because the year identifies the text that applies.

In a catalogue or a filing system it is found under ICS 33.200 and CCS F 21 — the international classification and the Chinese one, which are the two codes by which a standard on this subject is searched.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.

Similar standards

How to Download GB/Z 18700.4-2002

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
19 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 18700.4-2002

$325.00