Valid

GB/Z 183-2026Wind energy generation systems - Requirements for marking and lighting of wind turbines (English PDF)

风能发电系统 风力发电机组标识与照明要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (24 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 183-2026 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 30, 2026

Implementation date

July 30, 2026

Scope

GB/Z 183-2026 is the English-translated version of 风能发电系统 风力发电机组标识与照明要求.

GB/Z 183-2026 is the Chinese standard "Wind energy generation systems - Requirements for marking and lighting of wind turbines".

Its scope clause reads: This document specifies the technical requirements for aviation markings and lighting of wind turbine generator sets, covering visible light and infrared (IR) lighting systems, in order to Ensure the target identification ability of night vision goggles (NVG) users.

The standards and recommended measures in Annex 14 of the International Civil Aviation Organization (ICAO) have served as the basis for developing supplementary harmonized specifications.

To support its implementation. This document applies to wind turbine generators with blade tip heights ranging from 150m to 315m [onshore, measured by altitude above ground (AGL); offshore, measured by altitude above ground (AGL)].

Based on Mean Sea Level (AMSL), the technical requirements for signage and lighting are specified. These requirements aim to enhance the contextual awareness of airspace users.

This capability ensures flight safety for aircraft near wind turbine generators and, while achieving aviation safety goals, contributes to reducing environmental impact.

Provides technical support. If the height of the wind turbine generator exceeds 315m and the regulatory framework is updated to accommodate these heights, this document will be reviewed accordingly.

Review and revise; if the regulatory framework is not updated, at least follow the technical requirements of this document. For wind turbine generators with a blade tip height of 150m or less, lighting may be required in certain situations, but this is not the case.

Found what you need?

Document preview — GB/Z 183-2026

National Standard of the People's Republic of China

ICS
27.180
Classification
F 11

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1.Scope
  • 2 Normative References
  • 3.Terms and Definitions
  • 4.Abbreviations
  • 5.Painting and markings on wind turbine generators and wind farms
  • 6.Lighting for wind turbines and wind farms
  • 7.Precautions during construction
  • 8.Reduce light pollution
  • Appendix B (Normative) Definition of Identification Colors on Wind Turbine Generators
  • Appendix C (Normative) Definition of Light Colors for Wind Turbine Generators
  • Appendix D (Normative) Light Distribution of Low, Medium, or High Intensity Obstruction Lights
  • References

1 Scope

This document specifies the technical requirements for aviation markings and lighting of wind turbine generator sets, covering visible light and infrared (IR) lighting systems, in order to

Ensure the target identification ability of night vision goggles (NVG) users.

The standards and recommended measures in Annex 14 of the International Civil Aviation Organization (ICAO) have served as the basis for developing supplementary harmonized specifications.

To support its implementation.

This document applies to wind turbine generators with blade tip heights ranging from 150m to 315m [onshore, measured by altitude above ground (AGL); offshore, measured by altitude above ground (AGL)].

Based on Mean Sea Level (AMSL), the technical requirements for signage and lighting are specified. These requirements aim to enhance the contextual awareness of airspace users.

This capability ensures flight safety for aircraft near wind turbine generators and, while achieving aviation safety goals, contributes to reducing environmental impact.

Provides technical support. If the height of the wind turbine generator exceeds 315m and the regulatory framework is updated to accommodate these heights, this document will be reviewed accordingly.

Review and revise; if the regulatory framework is not updated, at least follow the technical requirements of this document.

For wind turbine generators with a blade tip height of 150m or less, lighting may be required in certain situations, but this is not the case.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.

For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.

This document.

IEC 61400-30 Wind power generation systems – Part 30.Safety design requirements for generators in wind turbine generator sets (Windenergy)

IEC 62443-4-2.2019 Safety of industrial automation and control systems – Part 4-2.Technical safety requirements for IACS components

IACS components)

International Civil Aviation Organization (ICAO) Airports, Volume 1.Airport Design and Operation (8th Edition, July.2018)

International Civil Aviation Organization (ICAO) Airport Design Manual, Part 4.Visual Aids (Document No. 9157-Part 4)

VisualAids(Doc9157-Part 4),FifthEdition,2021]

Note. In drafting this document, the national regulations of multiple member states of the International Civil Aviation Organization (ICAO) regarding the marking and lighting of wind turbine generators have been fully considered.

Guidelines (not listed individually due to their large number). Some clauses cite specific cases from national guidelines to supplement the technical aspects of the international guiding principles in this document.

detail.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.

Similar standards

How to Download GB/Z 183-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
24 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 183-2026

$420.00